- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Sound card X600 provides the users of the Raspberry Pi with the high quality sound. It decodes and separates the voice from the signal HDMI, solving the problem of low capabilities of the built-in system. It supports digital outputs 5.1 and analog 2.0. It has the possibility to decode Dolby Digital AC-3, DTS, LPCM sound and many others.
|
Controller for Raspberry Pi 2 and B+ can be downloaded fromthe manufacturer's website. |
The device has two RCA jacks, SPDIF and Coaxial connector, and jack 3,5 mm for connection of microphone line. On board is an IR receiver and a SATA connector. Details about the card X600 can be found onthe product's page. The manufacturer submits a detailed configuration of the module.
The distribution of the elements of the module X600 Expansion Shield
Specification
- Connection: using GPIO
- Supply voltage: 6 V to 20 V
- Support for audio and video
- It allows you to separate the audio from the HDMI signal
- It converts audio from HDMI to SPDIF, Coaxial, or RCA connectors
- Support for sound Dolby Digital 5.1, AC3 and DTS
- Support for analog sound 2.0
- Support for input signal of 1080p (24/60) Hz
- Built-in SATA port
- Power connector
- Output power: 2 x 20 W 4 Ω
- DIP switches to control the GPIO pins
- IR receiver for wireless communications: 38kHz
- Jack output of 3.5 mm Stereo for headphone connection
- The module is suitable for GPIO connectors of Raspberry Pi 3B, 2B and B+
- The kit includes jumpers, screws and installation bushings
- Dimensions 85 x 56 mm
Useful links |
