The Dreamer Nano v4.0 - compatible with Arduino

Index: DFR-02687 EAN: 6959420902057

DFRobot module compatible with Arduino Leonardo. It has 20 digital inputs/outputs, 7 PWM channels, 12 analogue inputs and popular communication interfaces. The board is characterized by small size: 45 x 20 x 20 mm.

The Dreamer Nano v4.0 - compatible with Arduino
€13.50
€10.98 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot

Product description:Dreamer Nano v4.0 - compatible with Arduino

Dreamer is compatible in terms of programming and description ofArduino Leonardooutputs. It means that it can be programmed throughArduino IDE environmentusing available libraries. DFRobot module is characterized by very small size: 45 x 20 x 20 mm, so that it can be accommodated in small, cramped areas such as electrical wall boxes.

The board contains an ATmega32u4 microcontroller equipped with 20 digital inputs/outputs of which 7 can be used as PWM outputs (e.g. for motor control) and 12 as analogue inputs. The board is clocked with a 16 MHz clock signal. The module also has: microUSB connector, socket, RESET button and outputs for connecting the AVR programmer.

In order to run DFRduino, you have to connect the circuit with a computer using USB cable and select Arduino LeonardoboardinArduino IDE environment.

 

Power supply .

The module can be powered viathe USB cable andan external device, e.g. mains adapter, battery or rechargeable battery. The battery or other source is connected to the VIN and GND pins.

Programming

Creation and installation of softwareenables freeArduino IDEenvironment. Implemented bootloader allows you to upload program directly viaUSB cable.ISCP connector allows to connect externalAVR programmer. Detailed description can be found indocumentation and tutorial.

DreamerNano v4.0specification

  • Power supply voltage: 6.5V to 12V
  • The voltage of the logical outputs: 5V
  • Programmed via microUSB
  • Fully compatible withArduino Leonardo
  • Microcontroller: ATmega 32u4
  • Maximum clock frequency: 16 MHz
  • SRAM: 2.5 kB
  • Flash memory: 32 kB (8 kB reserved for bootloader)
  • EEPROM memory: 1 kB
  • Ports I/O: 20
  • PWM outputs: 7
  • Number of analog inputs: 12 (A/C converter channels)
  • Serial interfaces: UART, SPI, I2C
  • External interruptions
  • Connector: microUSB socket(USB cable soldseparately)
  • Soldering of the ISP connector
  • I2C interface connectors are available on digital outputs: SDA - D2 and SCL - D3
  • Dimensions of the plate: 45 x 20 x 20 mm

Voltage to 7.0 V
Voltage from 12.0 V
Voltage output from 5.0 V
Output voltage to 5.0 V
Nominal output voltage 5.0 V
UC - Microcontroller Atmega32U4
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2,5 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 12
UC - freq 16 MHz
UC - A/C 10-bit
UC - PWM 7
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 6.5 cm
Package height 8 cm
Package depth 2.5 cm
Package weight 0.013 kg

Be the first to ask a question about this product!

Product reviews

The Dreamer Nano v4.0 - compatible with Arduino

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Grzegorz 12.03.2023 Confirmed purchase Translated review
I got a newer version v4.1. The diagram shows that in this version the clock and SPI data lines were brought out to the J2 connector. Dreamer Nano works seamlessly with the Arduino IDE. I launched the first project - hula. A version without goldpins would be useful, but it's rather a request to DFROBOT.
Marcin 01.02.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: