• EOL

Grove - W600 WiFi module ARM Cortex M3

Index: SEE-15455

2.4 GHz WiFi module for Arduino supporting 802.11 b/g/n standard. W600 is based on ARM Cortex M3 processor with 1 MB flash memory and freeRTOS kernel. It communicates via UART interface. The board is equipped with Grove connector for easy connection with Grove Base Shield.

Grove - W600 WiFi module ARM Cortex M3
€11.00
€8.94 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio

Attention!

The sale of the product has been completed. Check others in thiscategory.

Product description: Grove - WiFi module W600 ARM Cortex M3

2.4 GHz WiFimodule forArduinosupporting802.11 b/g/n standard. W600 is based onARM Cortex M3processor with1 MBflashmemory andfreeRTOSkernel. It communicates viaUART interface. The board is equipped withGrove connectorfor easy connection withGrove Base Shield.

W600is equipped withGroveinterface,two buttons(reset and configuration) andthree LEDs(power, reset, WiFi). There is alsoa PCB antennaon the board. The module supportsAT commands, just connect the module to Arduino and connect to WiFi using UART program. The module is also equipped with additional I/O pins, such as:I2S, I2C, SPI, GPIO.

Moduł WiFi W600Also included is a compatible Grove cable.

The module works withAndroid and iOSsystems,in the application you can connect and disconnect from the WiFI network with one button.

Product compatible withArduino

The producer prepareda library for Arduino.

Connection of the module

The module is equipped with Grove interface for easy connection withArduinoandBase Shield v2.0overlay.

Moduł W600

Pin Description
GND The weight of the system.
VCC Supply voltage 5 V.
TX The transmitting pin of the UART transmission.
RX UART transmission receiving pin.

Module specification W600

  • Power supply voltage: 5 V
  • Supported standard: IEEE 802.11 b/g/n
  • Supported frequency: 2.4 GHz to 2.4835 GHz
  • Supported WiFi encryption: WMM / WMM-PS / WPA / WPA / WPA2 / WPS
  • Protocols supported: TCP / UDP / ICMP / DHCP / DNS / HTTP
  • Built-in GPIO controller
  • Supports AT commands + instructions based on ASCII
  • UART communication
  • Dimensions: 50 x 25 mm

Voltage to 5.0 V
Voltage from 5.0 V
Frequency from 2.4 GHz
Frequency to 2.4 GHz
UC - Microcontroller W600
Package width 9 cm
Package height 4 cm
Package depth 1.5 cm
Package weight 0.012 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: