- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Set with wireless joystick to control the project based on XBee. It offers the possibility to remotely control the robot. Used as alternatives to traditional RC transmitters. It is equipped with 2 joysticks or one joystick and four buttons. In form and in functionality, it reminds the controller from Nintendo. The system is designed for self-assembly, it requires a simple soldering of the basic components. Module dimensions: 102 x 51 mm.
The module is equipped with the SAMD21 chip. For correct operation, you need to connect the XBee module and power supply, e.g. lipol battery. The set can be put into one of two configurations:
- two joysticks: to control RC vehicles, for example, tanks, cars
- joystick and 4 tact switch buttons: similarly to game pads
| The manufacturer provides a detaileduser manual. |
Connection
The module has the following pins:
| Pin | Description |
|---|---|
| GND | The ground of the system. |
| 3.3 V | Supply voltage is 3.3 V. |
| SDA | The data line of the I2C bus. |
| SCL | Clock line of the I2C bus. |
| A4, A5 |
The analog outputs. |
| D10-D13 | The digital outputs. |
| MOSI |
The data line of the SPI bus. |
| CCS |
The clock line of the SPI bus. |
| MISO |
The data line of the SPI bus. |
Included
- Main board
- 2 x lying switch
- 2 x joystick
- 4 x tact switch of 12 mm
Useful links |
