Description: Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS - overlay for Raspberry Pi 4B/3B+/3B/2B/Zero.
The GNSS overlay for RaspberryPi and JetsonNano mini-computers supports Multi-GNSS systems:GPS, BDS and QZSS. The main advantages of the module arefast positioning,highaccuracy andlowpower consumption of13 mA,and its supply voltage is3.3 V to 5 V.It communicates through the serial interface UART (RX, TX) via AT commands.
Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS
EASY™ and AlwaysLocate™ technology
With EASY™ technology, positioning becomes much faster with route prediction, while AlwaysLocate™ saves energy by putting the device into periodic measurement mode. Module supporting DGPS, SBAS (WAAS / EGNOS / MSAS / GAGAN). The device communicates through the UART interface at 4800 to 115200 bps (default 9600 bps).
Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS
Features and applications of the Waveshare L76X Multi-GNSS overlay
- UART communication interface
- EASY™, a route prediction technology, helps with fast positioning
- Baud rate: 4800 to 115200bps (default 9600bps)
- Supports DGPS, SBAS (WAAS / EGNOS / MSAS / GAGAN)
- 4x LEDs to indicate the operating status of the module
- The device is used in vehicle tracking, safety systems, industrial PDAs and GIS applications.
Included:
- Overlay L76X GPS x 1
- External GPS(B) x 1 antenna
- USB cable type A x 1
- Screw set for RPi (2 pieces) x 1
- Pingeader 2 x 20 PIN x 1
Technical Specification of Waveshare L76X Multi-GNSS module
| Parameter | Scope |
|---|---|
| Communication interface | UART |
| Transmission speed | 4800 to 115200 bps (default 9600 bps) |
| Update frequency | 1 Hz (default), 10 Hz (maximum) |
| Protocols | NMEA 0183, PMTK |
| Supply voltage | 3.3 V to 5 V |
| Working current | 13 mA |
| The work pace | from -40℃ to 85℃ |
| Dimensions | 65 mm x 30 mm |
Useful links |
