Product description: Guardio Micro GSM controller
TheGuardioMicro's multifunctional GSM control and messaging module is a device forcommunication, 24-hourSMS surveillance. The controller is very easy to use and install, and comes with a user manual that contains all the information needed for this. The device can be used in many areas, e.g. to control a garage door, roller shutters, boiler, air conditioning and many other devices in your home, garden. You can control it from anywhere in the world.
Guardio Micro GSM controller.
Guardio Micro isecological, does not consume much power, only2 mAat rest. It is powered from12 V to 28 V.Long-term operation is also possible when the device is connected to the battery. It is built with the highest quality materials.
Guardio Micro functions.
Main functions of the controller
- Alarm function:operation of the output in continuous or pulsed alarm modes, violation of theinputs can activate the relay to which the siren can be connected.
- Control by means of applications or SMS commands using GSM communication.
- Controlling multiple devices:e.g. control of roller shutters at home, garage door.
- Notification of two authorized users.
- PIN code setting: the device can be protected with a 4-digit user-defined PIN code.
- Notification of alarm or sensor breach.
- Compatible with alarm sensors.
- Remote control of two devices:two independent relay outputs with adjustable activation time from 1 s to 99 s or in "on/off" mode.
- Control by means of ringing (CLIP):remote control of the outputs by calling the number of the SIM card placed in it.
- Memory for 26 authorized users of ringing control:the device can activate the outputs after receiving calls only from previously saved users.
- Remote voltage measurement: voltage measurement input in the range from 0 V to 15 V with 0.1 V accuracy.
- Voltage alert:notification of exceeding the set voltage range.
- Temperature alerts:remote temperature measurement in the range from -55°C to +125°C with measurement accuracy of 0.5°C, authorized user is notified about exceeding the set temperature range.
- Thermostat function with heating or cooling support:possibility of remote thermostat switching on and off after defining one of two operation modes (heating or cooling) and thermostat switching on and off temperature.
- Protection against loss of GSM signal:if one of the inputs has been triggered and the device cannot send a notification due to lack of communication with the GSM operator, the fact of triggering is stored in non-volatile memory, so that immediately after regaining communication the notification is sent to authorized users.
- Roaming support:it is possible to install in the device a SIM card of any domestic or foreign GSM operator. Using the card of the domestic operator abroad, the device will send notifications for international roaming.
- Very economical, it has a low power consumption:the power consumption during standby is about 2 mA.
Set contents.
Included in the kit:
- Guardio Micro GSM controller
- GSM quad-band antenna 3 dBi
- Screw connector set
- Operating instructions
Guardio exits
|
Pins Entrances |
Description |
|---|---|
| 1. | Power supply: Mass |
| 2. | Power supply: 10 V to 28 V |
| 3. | Input A |
| 4. | Input B |
| 5. | GND |
| 6. | TS |
| 7. | VS |
|
Pins Exits |
Description |
| 8. , 9. , 10. | Exit A |
| 11. , 12. , 13. | Exit B |
Guardio Micro GSM controller specification
- Colour: black
- CPU: Microchip ATMega 328DP
- GSM frequency range: 850 to 900 / 1800 to 1900 MHz
- Supply voltage: 12 V to 28 V
- Antenna type: external
- Current consumption: maximum 2 A
- Types of notifications:
- Call
- SMS
- Ringtone and SMS
- Number of entrances: 2
- Working humidity: from 20% to 85%
- Operating temperature: -25°C to 85°C
- Temperature measurement: from -55°C to 125°C (with 0.5°C accuracy)
- Dimensions: 90 x 65 x 25 mm
- Weight: 100 g
Useful links |
