- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Hand Gimbal Moza Air 2
The4-axis gimbalMoza Air 2 works well with NikonZ6.The1.6 kggimbal can hold devicesup to 4.2 kg. Moza Air 2 is sufficient for16 hours of usewhen the battery is fully charged. The device can record incredibletimelapsand also has aSport andInception mode.On the handle there is an extensive control system with a smallOLED display.
Moza Spark power system
The new power system offers 4 ports that can power the camera, accessories such as: electronic focus, LED lamp and monitor. A key element is the Battery Management System (BMS), which optimizes the power consumption of gimbal and accessories, increasing battery life. The built-inLi-Ion 18650 batteriesallow the Moza Air 2 to run for up to 16 hours.
Moza Spark power system in the Air 2.
Intelligent Time-Splash
The operator has up to 20 optimizations at his disposal to facilitate the recording of personalized and professional time-lapse films, such as motion-lapse, tracking time-lapse, zoome time-lapse and others. In addition to time-laps recording mode, there are Sport, Inecption, FPV, Panorama and Tracking mode.
4-axis control
With the ability to control 3 axes in 8 tracking modes, you can record in different modes such as Inception, FPV, Sport, Panorama and Tracking. The 4th axis is iFocus, it allows you to control focus and zoom.
You can control 4-axis in Moza Air 2.
Auto-tuning
Gimbal has been equipped with an efficient AI calculation system, which enables the automatic selection of gimbal parameters for the best performance, based on the total mass based on gimbal, reducing the inconvenience associated with re-adjustment.
Automatic configuration function.
Simple release system
Moza Air 2 is equipped with a simple release system that works with Manfrotto plates and offers a stable camera or camera mount using a robust thread. This thread ensures that the camera is always in one position.
Quick Release System in Moza Air 2.
Compact design
The device is equipped with an angled arm with a motor, which ensures constant access to the OLED screen and plenty of space for camera settings. The bracket is equipped with 12 physical buttons that provide quick access to camera functions such as recording, zoom, focus, ISO, shutter, iris, exposure compensation and white balance.
Compact gimbal construction.
Intuitive control
The built-in small OLED display shows feedback from the device, accurately indicates the status of gimbal and helps to adjust the parameters of gimbal and camera. The joystick, smart dial and trigger of the Moza Air 2 can be customised to suit your tastes. Up to five different user control profiles can be saved and recalled.
Intuitive gimbal control.
Expansion possibilities
The device is equipped with 1/4" and 1/3" holes at the bottom and a 3/4" screw hole at the back of the handle, so you can expand the gimbal with additional devices. The gimbal can stand on a tripod, slider, jib, crane or other device with a universal connector.
Mounting holes in the Moza Air 2 gimbal.
Moza AirCross gimbal specifications
| Specification | |
|---|---|
| Mechanical movement range |
Deviation axis (Pan): 360° Tilt axis (Tilt): -95° to +180° Swivel axis (Roll): 360° |
| Controlled range of motion |
Tilt axis (Pan): 360° Tilt axis: from -95° to +180° Pivot axle (Roll): 30° |
| Movement deviation | Max. ±0.1° Min. ±0.5° |
| Deviation in static state | Max. ±0.3° Min. ±0.1° |
| Operating voltage | Min. 13.6 V Standard. 15.2 V Max. 16.8 V |
| Constant current | 150 mA |
| Battery | Li-Ion 18650 |
| Capacity | 2500 mAh |
| Battery life | 16 h |
| Charging time | 5 h |
| Battery operating temperature |
Unloading: 0°C to 50°C Charging: from 0°C to 45°C |
| Communication | Bluetooth 4.0 BLE 2.4 GHz USB-C Multi CAN |
| Power Ports |
DC OUT:
DC IN:
|
| Operating temperature | from 0°C to 50°C |
| Dimensions of gimbal | 470 x 240 x 230 mm |
| Maximum load | 0.3 kg to 4.2 kg |
| Mass of gimbal | 1.6 kg |
The set includes
- Gimbal Moza Air 2
- iFocus engine
- 4x battery 18650
- Battery charger
- Quick Release Plate
- Lens bracket
- Lens bracket screw
- Tracking Focus Tube
- Tracking seal bracket
- Backing plate
- Wiring bag
- USB-C cable
- Cable to camera
- Carrying bag
- Camera mounting key
- Joystick attachment
- Scratch-resistant cover
- Hexagon screws M3
- 1/4" screws
- Screws 3/8"
- H2 hexagon key
- Operating instructions
- Stable
- Lens ring
- Multi CAN cable
- Instructions for iFocus-M
Useful links |
