• EOL

Soldering station hotair and tip-based 2in1 Zhaoxin 868DH with fan in iron - 760W

Index: LUT-08760 EAN: 5903351240604

Soldering iron with a heating capacity of 75 W and hot air. The total capacity of station is 760 watts. The device has an adjustable temperature, standby mode and LED display. The blow of air is provided through a fan located in the handle.

Soldering station hotair and tip-based 2in1 Zhaoxin 868DH with fan in iron - 760W
€68.90
€56.02 tax excl.
Manufacturer: Zhaoxin

Attention!

The product has been discontinued. Check other products in category.

Description

Station Zhaoxin 868DH has an LED display where you can read the temperature of hot air. The temperature of the tip and of air is controlled by means of buttons and knobs.

The device hasa sensor in the stand, with which the station cools down the heating element in the time from 3 to 8 minutes after putting down the iron, and then automatically switches the device tolow energy consumption(the so-called standby mode). This mode allows to save energy, prolong the service life of the heater and increases safety. Station remembers the set temperature.

 

Stable and efficient blow of air througha fan located in the iron. It is driven by a brushless motor that provides high durability and reliability.

Check out our offer of additional tips!

Specification

  • Supply voltage: 230 V / 50 Hz (network)
  • Power:760 Watts
  • The station is controlled by the microcontroller which ensures a high stability
  • The device has astandby mode
  • The temperature stability of the soldering tip
  • Equipped with ergonomic housing
  • ESD protection

Soldering IronHotair

  • Adjustable temperature hot airfrom 100 °C to 480 °C
  • Temperature stability +/-1 °C
  • LED display colorblue
  • Set temperature use the rotary controller and buttons
  • Stepless adjustment of air blow - using a regulator
  • Air flowup to 120 l/min
  • The air blow is provided through a fan located in the handle
  • The fan is drivenby a brushless motor

Soldering Iron Tip-based

  • Regulation of the soldering tip temperaturefrom 200 °C to 480 °C
  • Power:75 W
  • Temperature stability +/- 1 °C
  • The temperature stability of the soldering tip

 

Inthe set:

  • Sodlering station WEP 868DH
  • Hotair iron stand 
  • Set of nozzles:
    • round nozzle with a diameter of 4.5 mm
    • round nozzle, with a diameter of 7.5 mm
    • round nozzle with a diameter of 11.2 mm
  • Soldering iron stand with a cleaning sponge
  • Solderin iron with tip T-B

 

 

First run

  • You should not run the device immediately after delivery.
  • Equipment must remain for about 12 hours at room temperature before switching on.
  • All complaints caused by running of the equipment too soon will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).

 

Our range of accessories for soldering:
Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 760 W
Temperature 200 - 480 °C
Solder - Fan yes
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital
Package width 0 cm
Package weight 2.75 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: