Shelly RGBW2 - LED RGBW driver WiFi - Android / iOS application

Index: ALT-14380 EAN: 3800235262191

Ready to use module that allows you to control the LED RGBW strips through WiFi using mobile app from anywhere in the world. It is powered with the voltage from 12 V to 24 V, it has 4 channels. To use Shelly, it is sufficient to configure the device via web browser. Compact dimensions enable to close the module in the electrical junction box.

Shelly RGBW2 - LED RGBW driver WiFi - Android / iOS application
€24.90
€20.24 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Shelly

Product description: Shelly RGBW2 driver LED RGBW wifi

Ready to use module that allows you to control the LED RGBW strips through WiFi using mobile app from anywhere in the world. It is powered with the voltage from 12 V to 24 V, it has 4 channels. To use Shelly, it is sufficient to configure the device via web browser. The device has threaded connectors for mounting the wires, the compact size allows to close the module in the electrical junction box.

Shelly RGBW2 - sterownik LED RGBW WiFi

The device has threaded connectors for mounting the wires, in the back are adhesive strips which facilitate the mounting of the module.

Shelly RGBW2 can be controlled via voice commands using a voice assistant, such as: Amazon Alexa or Google Home.

Wiring diagram for LED Shelly RGBW2 driver

Before connecting, switch off the voltage in a powered circuit. A driver must be installed in a place protected from the weather and from access by third parties.

Schemat podłączenia Shelly RGBW2

Schemat podłączenia Shelly RGBW2

Wiring diagram

Shelly RGBW2 was equipped with seven pins in the form of bolted connectors, to which connected  can be the wires using a screwdriver. The device can control one LED RGB W strip or four single-color LED strips and 230 V AC bulbs and LED strips.

  • I - input with zero potential
  • DC - supply voltage, shared with the LED strip.
  • GND- ground of the system.
  • R- the red channel (RED).
  • G- the green channel (GREEN).
  • B- the blue channel (BLUE).
  • W- the white channel (WHITE).

Configuring the LED RGBW Shelly RGBW2 driver

For configuration, you need to connect to a wireless network of the device called "shellyswitch-xxxxxx" where "xxxxxx" is the serial number of the device, then use the Android Play or the AppStore to download the Shelly application. To pre-configure the device, click on the default device name. 

Shelly2 - Double Relay Switch

The configuration can be done also via the website, for this, you need to connect to a wireless network of the device, then just launch the Internet browser and enter the IP address of the device: http://192.168.33.1. A configuration website will appear where you must select your home WiFi network and enter the password.

Specification of the Shelly RGBW2 driver

  • Supply voltage: 12 to 24V
  • Current consumption: up to 50 mA
  • Number of channels: 4
  • Maximum output power:
    • 12 V: up to 144 W (up to 45 W per channel)
    • 24 V: up to 288 W (up to 90 W per channel)
  • WiFi standard: 802.11 b/g/n
  • WiFi operation mode: STA / AP / STA+AP / Smart Config
  • Network securities: None / WEP / WPA / WPA-PSK / WPA2-PSK (TKIP / AES)
  • Frequency: from 2.4 GHz to 2.5 GHz
  • Range: up to 60 m in open space, 30 m inside
  • Working temperature: from -10 °C to 40 °C
  • Operating humidity: 5% to 95 %
  • Output interfaces:
    • 4-channel PWM: R/G/B/W
    • 3-channel PWM: R/G/B
    • 4-channel PWM: 4x white LED strip or 4 x 12 V / 24 V LED bulb
  • Interface: reset button, 230 V AC input switch
  • AC switch function: On/OFF and dimming
  • Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
  • Dimensions: 43 x 38 x 14 mm

Smart Home Lighting controller
Package width 6.4 cm
Package height 4.4 cm
Package depth 6.4 cm
Package weight 0.038 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: