Touch screen - resistive IPS LCD 10,1'' 1024x600px HDMI + GPIO for Raspberry Pi - Waveshare 11870

Index: WSR-07078 EAN: 5904422371272

Waveshare touch screen resistive with a diagonal of 10.1" and a resolution of 1024 x 600 px. Works with Raspberry Pi in versions 3, 2, B+ Zero via the HDMI connector and the GPIO pins.

Touch screen - resistive IPS LCD 10,1'' 1024x600px HDMI + GPIO for Raspberry Pi - Waveshare 11870
€81.50
€66.26 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Description

Waveshare touch screen resistive with a diagonal of 10.1" and a resolution of 1024 x 600 px. Works with every 40-pin version Raspberry Pi via the HDMI connector and the pins GPIO - connectors included in the package.

The device communicates via HDMI adapter (image) and pins GPIO (touch).

Connecting to Raspberry Pi

In order to run the screen, put the device on the GPIO pins of the Raspberry Pi and connect the HDMI connector.

Example of connecting the screen tothe Raspberry Pi.

A detailed description of the connection and driver installation, without changes to the Raspberry Pisystem, and the image of a finished system can be found onthe website of the manufacturer. Drivers can also be installed manually on the already existing system - details can be found inthe user guide.

Screenshot of the programWin32 Disk Imager, when you select the system, just press the Write button and wait until the installation process is completed.

Symbol Description
1 Select the system file.
2 Select the SD card.

GPIO interace 

Pin GPIO Symbol Description
1, 17 3.3 V Power 3.3 V.
2, 4 5V Power 5 V.
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC Not connected.
6, 9, 14, 20, 25 GND Ground.
19 TP_SPI SPI interfaceinput data of SPI for the touch panel.
21 TP_SO SPI interface output data of SPI for the touch panel.
22 TP_IRQ The interruption of the touch panel, detection of the touch establishes a low state.
23 TP_SCK Clock signal SPI for the touch panel.
26 TP_CS Chip select for touch panel.

Specification

  • Screen type: resistive touchscreen
  • Diagonal: 10,1 "
  • Resolution: 1024 x 600 px
  • Communication:
    • Video - HDMI slot (connector included in set)
    • Touch - pins GPIO
  • Works i.a. with,the Raspberry Pi in versions 4 3, 2, B+ Zero
  • Screen dimensions: 235 x 162 mm

The external dimensions of the screen.

Screen - type LCD TFT
Screen - diagonal 10.1''
Screen - interface HDMI+GPIO
Screen - touch yes
Screen - resolution 1024x600px
Test 3
Package width 28 cm
Package height 5 cm
Package depth 18 cm
Package weight 0.675 kg

Be the first to ask a question about this product!

Product reviews

Touch screen - resistive IPS LCD 10,1'' 1024x600px HDMI + GPIO for Raspberry Pi - Waveshare 11870

4.9/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

janusz 22.08.2023 Confirmed purchase Translated review
Well thought out, easy to connect and install. There is no possibility to work with other overlays, i.e. connections to GPIO pins, e.g. with tape. I am now facing a housing problem - maybe some suggestions on the shop :)
Marta B. 05.12.2021 Confirmed purchase Translated review
Great equipment
Joanna P. 06.09.2021 Confirmed purchase Translated review
The recipient of the product does not submit any comments
Jarosław M. 02.06.2021 Confirmed purchase Translated review
Good colors, some manual data entry into config.txt, but it works as it should. The ability to rotate the image 180 degrees in raspbianie only after installing the manufacturer's drivers, but in bmc64 the standard lcd_rotate = 2 works without additional drivers. I have not tested the touch because I do not need it. Overall: I recommend it.
Christine 19.01.2024 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: