Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468

Index: RPI-19537 EAN: 633696492820
Cap designed for Raspberry Pi 3B+ and 4B versions which are equipped with 4-pin PoE connector. It allows simultaneous communication with LAN and powering the minicomputer board. The input voltage of the module ranges from 37 V to 57 V. The output voltage is 5 V and the current capacity is 4 A.
Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468
€24.50
€19.92 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Raspberry Pi
Compatibility: Raspberry Pi

Product description: Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468

HAT is designed for Raspberry Pi 3B+ and 4B versions which are equipped with 4-pin PoE connector. It allows simultaneous communication with LAN and powering the minicomputer board via Ethernet (RJ45) connector. PoE HAT does not require installation of additional drivers for proper operation, it is a plug-and-play product. On the board there is a brushless fan designed to cool the processor of the minicomputer, it starts automatically when high temperature is detected. The input voltage of the module ranges from 37 V to 57 V. The output voltage is equal to 5 V and the current capacity is 4 A. Arouter / switchwith PoE (Power over Ethernet) support is required for proper operation of the module.

Raspberry Pi PoE plus HAT PoE+ HAT overlay for Raspberry Pi minicomputers.
Nakładka PoE

This overlay allows powering Raspberry Pi 3B+ and 4B minicomputers with Ethernet cable using a PoE enabled router / switch.

Rules for safe use of Raspberry Pi PoE+ HAT

  • Do not obstruct the fan
  • Do not put anything between the blades while the fan is running
  • The product must not be exposed to water or moisture
  • The HAT must not be placed on a conductive surface
  • PoE HAT must not be used in a too hot place. It is designed to operate at room temperature
  • When lifting, be careful not to damage it mechanically
  • Avoid electrostatic damage, do not touch the device during operation
  • Peripheral devices should comply with relevant standards

Raspberry PoE+ HAT specification

  • Full network power: IEEE 802.3at-2003 PoE
  • Input voltage: 37 V to 57 V
  • Output voltage: 5 V
  • Output current: 4 A
  • Output Power: max 20 W
  • Built-in current sensor
  • Built-in brushless fan 25 x 25 mm, 2.2 CFM
  • Fan control
  • Fully isolated power supply
  • Operating temperature: 0°C to 50°C
  • Pinouts: GPIO x 40
  • 4 spacers included
  • Dimensions: 65 x 56.5 mm
Raspberry Pi PoE+ HAT

Raspberry Pi PoE+ HAT.

Comparison of PoE HATs
PoE+ HAT PoE HAT
Model PoE+ HAT PoE HAT
Standard 802.3 at 802.3 af
Supply voltage 37 V to 57 V 37 V to 57 V
Output voltage 5 V 5 V
Max. output current 4 A 2,5 A
Current sensor Yes No
Transformer Planar Flyback
Dimensions 65 x 56.5 mm 65 x 56.5 mm
Nakładka PoE dla Raspberry Pi

PoE overlay for Raspberry Pi, minicomputer can be purchased separately.

Convenient power supply for Raspberry Pi minicomputers

The specially designed PoE+ HAT overlay for the popular Raspberry Pi minicomputers allows you to power them using a PoE-enabled router or switch (via an Ethernet network cable). This means that the Raspberry Pi does not need an AC adapter to operate, making it much easier to install the minicomputer in locations where 230V mains access is limited.

A PoE compatible router or switch is required for the Raspberry Pi PoE HAT to work properly. The device requires 37 V to 57 V DC power supply. In addition to the planar transformer inverter, which provides 5 V and 3 A, the overlay also acts as an additional cooling system for the Raspberry Pi processor - A small fan significantly improves heat dissipation from the minicomputer components.

Package width 7.7 cm
Package height 7.5 cm
Package depth 2.5 cm
Package weight 0.057 kg

Be the first to ask a question about this product!

Product reviews

Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468

4.7/5

Average grade

13

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: