Description
Portable power supply platform for a min-computerRaspberry Pi. The module is based on ARM Cortex-M0. It has the original battery 1820 mAh from the Mororolla Droid 2 with the possibility of expanding with a battery Li-Polwith a capacity of 5000 mAh or even 10000 mAh. Thanks to the RTC module, Raspberry Pi will always know the current time, being disconnected from the power supply and Internet connection. Two status LED RGBinform about the state of charge of the battery and the On/Off button. This extension uses only 5 GPIO pins (power and I2C), so it does not preclude the use of other modules.
Renewable energy power sources
The battery used in the module can be recharged using renewable energy sources such as solar or wind power, using, for example, solar panels.
Solar panelsold separately.
Specification
- Input voltage: 4.2 V to 10 V
- Input voltage: from 3.3 V to 5 V
- Output current: 2.5 A 5 V current depends on the battery capacity to reach a max of 2.5 A need a battery with a capacity of more than 3500 mAh
- AC I2C address
- Microcontroller:STM32F030CCT6 ARM Cortex-M0,48MHz, F64KB, R8KB, I2C, SPI, USART, 2.4-3.6 V
- Battery: 1820 mAh
- Layout of the battery charger: battery charger Li-Ion/PolBQ24160RGET - from 4.2 V to 10 V / 2.5 A
- System battery levelindicator:LC709203FQH-01TWG - Li-Ion, 1-cell, 2.8 per cent
- EEPROM:CAT24C32WI-GT3 EEPROM, I2C, 32KBIT, 400KHZ, 1V7-5V5
- Additional pin spring:Mil-Max 0929-7-15-20-77-14-11-0
- Optional output for external buttons connected to the same output, SW1
- Output 6-pin: two GPIO ARM Cortex-M0
- Outputs for additional solar panels, wind turbines, etc.
- Extra Shield RF:Harwin S02-20150300
- Built-in RTC
- Compatible with: Raspberry Pi 3 / 2 / B+ and Zero and Zero W
- Smart On/Off switch
- 2x programmable LED RGBs
- 3 programmable buttons
- Dimensions: 65 x 56 x 20 mm
- Weight: 57 g
Set includes
- PiJucie HAT
- 1x battery
- Guide for PiJuice
- 4x mounting racks
- 8x screws
- 1x Pogo pin
- 3x sticker
Useful links |
