Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324

Index: ADA-03284 EAN: 5904422354091

Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a GPS and RTC system. The connectors are suitable for Raspberry Pi, version A+/B+/2/3/4.

Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
€42.90
€34.88 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Adafruit
Compatibility: Raspberry Pi

Description

Tile with the GPS+GLONASS PA1616D module, suitable for connectorsof the Raspberry Pi, version A+/B+/2/3/4. System communicates via serial UART interface, it has a built-in antenna, the receiver's sensitivity is 165 dB. The device is powered by minicomputer, it consumes only 20 mA of current. The update of frequency is 10 Hz which means the new data 10 times per second.

 

 

Included is a connector 2x20 pin that allows direct connection of the module to pinsof the Raspberry Pi A+/B+/2/3/4. The connector must be self-soldered.

Real-time clock

The module has a system RTC, from where you can download the actual time. An additional advantage is the possibility to insert a CR1220 battery which gives the possibility of maintaining the power of real-time clock even in a period of 7 years.

 

 

Monitoring

The LED indicator allows to monitor the status of the GPS module. Blinking with a frequency of about 1 Hz, it means finding the satellites, the appearance of light every 15 seconds indicates finding a FIX. The LED signal is led-out on the goldpin FIX connector so you can read it via the microcontroller.

Range

Built-in antenna gives the sensitivity of 165 dB, for increasing this parameter, you can add the external version via the u.FL connector. Since most of the available antennas have SMA connector, in our offer, you will find a suitableadapter u.FL - SMA.

 

Check how to connect and program the GPS module!

 

Basic module features:

  • Board is compatible with Raspberry Pi, version: A+/B+/2/3/4
  • GPS module: PA1616D with MT3333
  • Power for minicomputer Raspberry Pi
  • Current consumption: about 20 mA
  • Built-in RTC with possibility to connect the backup battery (CR1220)
  • The PPS signal is connected by default to GPIO 4
  • Built-in antenna capable of connecting the external version throughthe connector u.FL
  • Communication: UART (RX and TX pins)
  • Positioning accuracy: up to 3M
  • Sensitivity: -165 dBm
  • Update: 10 Hz
  • The LEDs indicating the FIX status
  • Maximum height: the theoretical, indicated by the manufacturer - 40 km, tested - 32 km
  • Included are connectors of 2x20 pin, compatible with the Raspberry Pi for self-soldering
  • Dimensions: 65 x 56 x 7 mm
  • Weight: 20 g

 

Accessories

GPS Hat along with a Raspberry Pi can be closed in the following cases:

 

Voltage to 3.3 V
Voltage from 5.0 V
Interface UART
GPS - Refreshing 10 Hz
GPS - Accuracy -165 dBm
Package width 10 cm
Package height 11 cm
Package depth 0.6 cm
Package weight 0.025 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: