- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Device works as a programmer and a debugger for all modules C8051Fxxx. The device connects to the module using the JTAG or C2 interface. Voltage supply 5 V through the USB port on your computer.
The device connects to the computer using a cable USB A - USB B, and with the module via a cable / tape JTAG or C2
|
Before connecting the interface cable JTAG / C2 to the debugger or module, make sure that both devices are not being powered up, otherwise it can damage the module and / or the debugger. |
Inputs of interface JTAG and C2
To connect the device with the module, you must use 10-pin connector cable / tape. Below you can find the layout of pins.
Specification
- Voltage: 5V power via the USB port on the computer
- Fully support USB 2.0
- ESD protection
- LED indicators show working status
- Debugging and programming in the system
-
- support Go or Stop, Step, Multiple Step, Breakpoint, Watchpoints, and so on.
- has up to four breakpoints
- Supported devices: all from C8051Fxxx
The kit includes
- Debugger / programmer
- Cable USB A - USB B
- 2 x cable / tape
Useful links |
