- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Minicomputer pcDuino8 uno with a powerfulAllWinner H8 processor ARM Cortex A7 octa-core 32-bit processor with a clock frequency of 2 GHz.Board has1 GB of DRAM, built-inGigabit Ethernet port, portHDMI 1.4 1080p/30 Hz, 3.5 mm jackand1 x USB 2.0,1 x USB OTG,microSD connector. It works with Linux or Android. The device is compatible withshields for the Arduino.
Device has 1 USB 2.0 slot, HDMI port, Ethernet port and many others.
What it takes to run minicomputera pcDuino8 uno?
- The microSD memory card - carrier, on which installed isoperating system
- AC adapter:
- 5 V / 2 Afor the minicomputer
- 5 V / 3 A - for minicomputer with attached shields
- HDMI cable- to connect the device to the monitor
- Mouse and keyboard - for control and input data into the device
- Connected Internet - to download the software
Operating system
pcDuino8 uno works with Linux and Android. The drive of the device can be microSD card.
|
The installation of the system is very simple -check out the user manual! |
Communication
pcDuino8 uno has basic communication interfaces which can be found in office computers of PCclass. The user has at his or her disposal:
- 1 x USB 2.0, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
- 1 x micro usb OTG- to connect as a slave
- Ethernet connector, that is the ability to directly connect to the LAN network.
- a slot for microSD - slot for memory microSD cards, on which can be installed the operating system.
- Arduino connectors - compatible with the Arduino shield.
- MIPI camera connector - for camera connection
- connector Jack 3.5 mm- for connecting headphones or speakers.
pcDuino8 uno has a connector fora microSD memory card.
Card is not included, it can be purchased separately.
Power
As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and the current of the used adapter shall not be less than 2.0 A. In our offer, you will findspecial power supplies.
pcDuino8 uno hasan HDMI portthrough, through which you can send image and sound in 1080p.
Specifications and comparison
| Basic information | ||
 |
 |
|
| Model | Raspberry Pi 3, B model | pcDuino8 uno |
| Edition | 3 - 2016. | 2015. |
| Technical specification | ||
| The core | Quad-Core ARM Cortex A53 | Octa-Core ARM Cortex-A7 |
| Operating systems |
Linux Raspbian Windows 10 IoT |
Linux Android |
| Clock frequency | 1.2 GHz | 2 GHz |
| RAM | 1 GB LPDDR2 @ 900 MHz | 1 GB DRAM |
| Memory | microSD card |
microSD card |
| GPIO slot |
Connector 40-pin (2x20 pin) pitch of 2.54 mm |
Connectors Arduino pitch of 2.54 mm |
| Power |
5.1 V / 2.5 A via microUSB |
5.0 V / 2 A via microUSB |
| Board sizes | 85 x 56 x 17 mm | 95 x 56 x 18 mm |
| Interfaces | ||
| USB interface | 4x USB 2.0 - slot type A |
1 x USB 2.0 - slot type A 1 x USB OTG microUSB |
| Network interface | port Ethernet 10/100 Mbps | port Ethernet 1 Gbit / s |
| The Wi-Fi interface | 802.11 b/g/n 150 Mbps | no |
| Bluetooth | Low Energy, BLE 4.1 | no |
| Camera | the CSI slot | MIPI interface |
| Touchscreen display | DSI slot | no |
| Video | HDMI HD 1080px / 30 fps | HDMI HD 1080px / 30 fps |
| Communication | UART, SPI, I2C, GPIO |
3.5 mm audio, UART, ADC, PWM, GPIO, I2C, SPI, |
Useful links |
