• EOL

FT245 USB converter - FIFO parallel interface - Waveshare 4655

Index: WSR-04456

The adapter allows you to connect the computer with the USB connector to the various modules via a parallel interface with a FIFO queue. It has 8 data contacts and 6 control contacts. Module dimensions: 41 x 30.5 mm.

FT245 USB converter - FIFO parallel interface - Waveshare 4655
€9.90
€8.05 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare

Attention!

The product has been discontinued. Check others products incategory.

Description

The adapter allows you to connect the computer with the USB connector to the various modules via a parallel interface with a FIFO queue. It has 8 data contacts and 6 control contacts.The module works with 3.3 V signals and 5 V, the voltage selection via a jumper. Without the bridge the device must be powered from the target board (3.3 V to 5 V). Module dimensions: 41 x 30.5 mm.

 

The system has a connector USB type a, compatible computer connectors.Works with operating systems Windows 7, 8/8.1 and 10.

Connection

The table describes the outputs of the converter.

 

Pin Description
VCCIO Power 3.3 V or 5 V is set using jumpers.
GND The ground of the system.
D0 - D7 The next bits of the data bus FIFO.
NC Not connected.
RST#

Pin input is an external device

to reset the FT245 chip.

PWREN#

Pin-code indicating the status of the USB bus:

  • Low - configuration device via the USB port
  • High - USB on hold.
TXE#

Pin code informing about the record

  • High - conservation is not possible,
  • Low - entry in the FIFO is possible via changing the state of contact WD from high to low.
RXF#

Pin code informing about reading

  • High - reading is impossible,
  • Low - data is available for reading in the FIFO read is done by changing the contact state with RD low to high.
WR#

Writes a byte of data on pins D0 - D7 into FIFO when switching from high to low.

RD#

A low state includes reading of the current FIFO data byte on pins D0 - D7.

If available the next byte read is through changing the state of contact with RD from high to low.

 

 

Converter - chip FT245
Converter - Socket USB
Converter - Interface FIFO
Test 4
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: