- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: SparkFun display micro OLED monochromatic graphic 0.66'' 64 x 48 px - I2C / SPI
A small monochrome OLED display with a diagonal of 0.96" and a resolution of 64 x 48 px. Characterized by high contrast. The device works with voltages of 3.3 V and 5 V, communicates via SPI or I2C. The average current consumption is 10 mA, does not exceed the maximum of 20 mA. The device displays blue pixels on a white background.
Connection
The display can be powered with a voltage of 3.3 V. The data lines also work only with that voltage, so to connect the LCD with a microcontroller operating with 5 V and above, for example Arduino Uno, you need to apply a converter. For communication you can select the I2C bus or SPI.
| Pin | Description |
|---|---|
| GND | The ground of the system. |
|
3V3 (VDD) |
Supply voltage 3.3 V. |
|
D1 SDI |
Bus SDA I2C clock line. SPI bus clock line. |
|
D0 SCK |
Bus SCK I2C clock line. SPI bus clock line. |
| D/C | Change of address of the I2C bus. The data line of the SPI bus |
| RST | Reset the module. |
| CS | Chip Select Device selection of the SPI bus. |
|
The product is compatible with Arduino The manufacturer has preparedthe manualandlibraryforArduino. |
Specification of SparkFun display micro OLED
- Supply voltage: from 3.3 V
- Communication: I2C or SPI
- Current consumption: 10 mA (max 20 mA)
- The address of the I2C bus: 7-bit
- Connectors: hole for goldpin connectors - 2.54 mm raster (not included)
- Weight: 3.5 g
Useful links |
