- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Description
NanoPimini-computerin A64 versionwithAllwinner A64 quad-coreARM Cortex-A53 1.152 GHzprocessor. The board has1 GB ofDDR3 RAM,built-inEthernet Gigabitport, WiFi module,HDMI portandtwoUSB ports, 40GPIO, 3.5mm jack, DSI connector andmicroSD card slot. Works withUbuntu-Core with QtEandUbuntu-MATEsystems.
The advantage of the tile is its small dimensions, the outline fits into a rectangle with sides of 64 x 60 mm.
What do you need to run a NanoPi minicomputer?
- MicroSD memory card- the media on which the operating system will be installed
- Powersupply unit with microUSB- 5 Vplugwith 2 A current capacity
- HDMI cable - toconnect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
Operating system
NanoPi works with the Ubuntu-Core and Ubuntu-MATE systems. The disk of the device can be a microSD card, which can be purchased in our shop.
|
Operating systems can be downloaded fromthe manufacturer's website. The manufacturer also provides asystem installation guide. |
Communication
The minicomputer has basic communication interfaces that can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has the possibility to use them:
- two USB connectors,under which you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few connections, you can increase their number usingan external USB HUB.
- Ethernet socket, i.e. the possibility of direct connection to the LAN.
- GPIO x 40 pin- general purpose Raspberry Pi compatible outputs/inputs, which can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting I2C, SPI and UART interfaces.
- microSD slot- a slot for a microSD memory card, on which the operating system can be installed.
- HDMI connector- transmits video to the monitor.
- 3.5 mm jack- for connecting speakers.
- DSI connector- to connect the screen
The device has 2 USB ports, HDMI and Ethernet port and many others.
In the set there is also an antenna.
Power supply
The system uses the microUSB connector as its power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will findpower supplies meeting these parameters, e.g.:Extreme 2.1 A power supply.
Touchscreens
Our offer includestouchscreensdedicated to NanoPi and NanoPC minicomputers.
The screen communicates through a tape cable using a dedicated LCD socket.
Starting set
The manufacturer has prepared aset of sensors and modules in a handy trunk, which makes it easy to start working with a mini-computer.
Contents of theMatrix Starter Kit- available separately.
Specification |
|
| Model | NanoPi A64 |
| Specification |
|
| Processor | Allwinner A64 |
| Core |
Quad-Core ARM Cortex A53 |
| Systems |
Ubuntu-Core with QtE Ubuntu-MATE |
| Clocking | 1.152 GHz |
| Memory RAM |
1 GB DDR3 |
| Memory |
microSD card |
| GPIO socket |
40 pins, Raspberry Pi compliant |
| Power supply |
5 V / 2 A - microUSB |
| Dimensions of the tiles | 64 x 60 mm |
| Weight of the plate | 22 g |
| Interfaces | |
| USB Host |
2 x USB 2.0 |
| Network interface | Ethernet Gigabit (RTL8211E) |
| WiFi interface | WiFi 802.11 b/g/n |
| Video | HDMI 1.4A, 1080p 60fps |
| Video | HDMI 1.4A, 1080p 60fps |
| Audio |
HDMI, audio Jack 3.5mm |
| Camera | DVP, 0.5 mm FPC socket |
| LCD | 0.5 mm SMT FPC socket (RGB: 8-8-8) |
| Communication |
UART, SPI, I2C, GPIO, PWM |
| Debugger |
Serial port 4pin / 2.54mm |
| Other |
Power, Reset buttons status LEDs |
The kit includes:
- NanoPi A64
- WiFI antenna u.FL
- USB cable - microUSB
Useful links |
