Description
Set includes the minicomputerNano Neo Pi 512 MB, a heatsink and a converter USB-UART. In addition, the set is completed with a power cable microUSB, memory card, and necessary mounting components.
| L. p. | Photo | Name |
|---|---|---|
| 1 |  |
NanoPi NEO 512 MB- minicomputer NanoPi in version 1.3 Neo with a processor Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. The board has 512 MB DDR3 RAM, built-in Ethernet port and USB connector + 2 x USB Host on pins 2.54 mm, 36 GPIO, connector for memory cards microSD. It works with manufacturer'ssystems u-boot and UbuntuCore. |
| 2 |  |
Heatsink with thermoconductive tape for NanoPi NEO- heatsink with thermoconductive paste and mounting screws dedicated for the minicomputer NanoPi Neo. |
| 3 |  |
Converter UAB-UARTbased on the system CH340T along with a connection cable. |
| 4 |  |
microUSB-USB cable- allows you to supply power to the minikomputera.Power supply unit with USB connector must be purchased separately. |
| 5 |
|
MicroSD memory cardclass 10 8 GB. |
| 6 |
|
The printed manual is helpful when you start the device for the first time. |
NanoPi Neo
MinicomputerNanoPiin versionNeo v1.3 with a processor -Allwinner H3 quad-coreARM Cortex-A7 with a clock frequency of 1.2 GHz. The board has512 MBof memoryDDR3, built-in portEthernetandUSB port + 2x USB Host on pins 2.54 mm,36 GPIO, connector for memory cards microSD. Works with manufacturer's systems u-boot and UbuntuCore.
A great advantage of the board is its small size, the dimensions of the board are 40 x 40 mm.
Power of the device
Unfortunately, the manufacturer did not include the power supply kit. NanoPi Neo requires 5 V power and it is supplied via microUSB. In our store there is available the power supply with the resective connector microUSB.
The device has a USB plug connector and an Ethernet port and many others.
Operating system
NanoPi works with the systems selected manufacturer: u-boot and UbuntuCore. The device'sdrive can be a microSD card, which can be purchased in our store.
|
Operating systems can be downloaded fromthe manufacturer's website. The manufacturer also provides a guide on the installation of the system. |
Specification |
|
| Model | NanoPi Neo |
| Specification |
|
| Processor | Allwinner H3 |
| Core |
Quad-Core ARM Cortex A7 |
| System |
u-boot UbuntuCore |
| Clock frequency | 1.2 GHz |
| RAM |
512 MB |
| Memory |
microSD memory card |
| Connector GPIO |
36-pin connector for self-soldering |
| Power supply |
5 V / 2 A - microUSB |
| Board size | 40 x 40 mm |
| Interfaces | |
| USB-Host |
1 x USB A socket 2 x USB Host on pins 2.54 mm |
| Network interface | Ethernet 10/100 Mbps |
| Video | - |
| Audio |
audio output and microphone out on the GPIO connector |
| Link |
UART, SPI, I2C, GPIO, PWM |
| Debugger |
Serial port 4pin / 2.54 mm |
| Others |
Built-in LED |
Useful links |
