NanoPi NEO v1.4 - Allwinner H3 Quad-Core 1,2GHz + 512MB RAM - without connectors

Miniature computer NanoPi in version 1.4 Neo processor-Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Tile has a 512 MB DDR3 RAM, built-in Ethernet port and USB connector + 2 x USB Host on pinach 2.54 mm, 36 GPIO connector for memory cards microSD. Works with system manufacturer's u-boot and UbuntuCore.

More details


Dodano produkt do koszyka

In stock, shipping 24 hours!

Price 84,70 zł

Product description: NanoPi NEO v1.4 - Allwinner H3 Quad-Core 1.2 GHz + 512 MB RAM

Miniature computer NanoPi in version Neo v1.4 processor Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Tile has 512 MB of memory DDR3, built-in port Ethernet and USB port + 2x USB Host on pinach 2.54 mm, 36 GPIO, connector for memory cards microSD. Works with system manufacturer's u-boot and UbuntuCore. Version v1.4 has a 4-pin audio interface, 2-pin interface CVBS, support power control IC and has the holes for mounting the radiator.

NanoPi Neo v1.4

The advantage of tile is its small size, the dimensions of the tiles 40 x 40 mm.

What it takes to run minikomputera NanoPi?

The device has a USB plug connector and an Ethernet port and many others.


Operating system for NanoPi Neo

NanoPi works with the systems selected manufacturer: u-boot and UbuntuCore. The drive device may have microSD card, which can be purchased in our store.


Operating systems can be downloaded from the manufacturer's website.

The manufacturer also provides guidance on the installation of the system.

Communication minikomputera NanoPi Neo

Minikomputer has communication interfaces that can be found in office computers of class PC. In addition to the previously listed connectors audio and video the user has at his disposal:

  • 1x USB A + 2x USB Host on pinach 2.54 mm, which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB. The interfaces displayed on pinach can be connected using wires.
  • Ethernet connector, that is the ability to directly connect to the network.
  • GPIO x 36 pin outputs/inputs General purpose that can be used to control the LEDs, buttons, drivers, enginethe. Among them are the contacts, supports interfaces: I2C, SPI and UART. The contacts have solder, strap goldpin raster of 2.54 mm can be purchased in our store.
  • a slot for microSD slot for memory cards microSD, which can be installed with the operating system.

NanoPi Neo v1.4

The distribution of the GPIO pins - pins have solder, strap goldpin raster 2.54 mm included in kit.

Food NanoPi Neo

As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 and a maximum output current of the used adapter shall not be less than 2.0 A. In our assortment you will find power supplies that meet these parameters.

Radiator z taśmą termoprzewodzącą do NanoPi NEO

In our offer you will find also special radiator.


ModelNanoPi Neo
ProcessorAllwinner H3
The core

Quad-Core ARM Cortex A7




Clock frequency1.2 GHz

512 MB


microSD memory card

Connector GPIO

36-pin connector

for self-wlutowania


5 V / 2 A - microUSB

Tile sizes40 x 40 mm

1 x USB A socket

2 x USB Host on pinach 2.54 mm

Network interfaceEthernet 10/100 Mbps

audio output and microphone

out on the GPIO connector



The debugger

Serial port 4pin / 2.54 mm


Built-in led
Interface CVBS 2-pin

Supports power supply control IC

The mounting holes for the radiator



  • UC - Microkontroler Allwinner H3
  • UC - Core Cortex A7
  • UC - RAM 512 MB
  • UC - core 4. Quad Core
  • UC - Digital pins: 30
  • UC - freq: 1.2 GHz
  • UC - Ethernet: yes
  • UC - USB: 1x USB
  • UC - microSD yes
  • UC - HDMI no
  • UC - I2C yes
  • UC - UART yes
  • UC - Connector: 5V microUSB
  • UC - SPI interface yes
  • UC - LCD interface no
  • UC - Camera interface no
  • UC - Linux yes
  • UC - Android no
  • UC - Windows no


Posting the payment for the order on our account on a business day up to 13:00 means sending the goods on the same day!


The time of payment depends on the hours of ELIXIR session of the sender's bank and the recipient of the transfer (more information on this subject, for example on the website


The table presents available forms of delivery in Poland


Carrier and

Bank wire

by cash


Poczta Polska

terms of service

9,90 PLN17,90 PLN1-3 days

Kurier GLS

terms of service

14,90 PLN22,90 PLN

1-2 days

Paczkomaty 24/7 

terms of service

12,90 PLN-1-3 days

If the amount to pay for products exceeds 500 PLN
Delivery is for free!


  • Free delivery of orders over 500 PLN does not apply to parcels addressed outside of Poland.
  • Free delivery does not apply when changing orders.
  • The delivery period is counted in working days from the date of dispatch of the order.