- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
MinicomputerNanoPi, version Core2with processor Allwinner H5 quad-core ARM Cortex-A53 1.5 GHz. The board has1GB of DDR3 RAMand8 GB of memory eMMC,Gigabit Ethernetport on pins of 2.54 mm andmicroUSB slot+3 x USB Hoston pins of 2.54 mm,68 GPIOsand a slot for microSDcards. Board has anESD protection for micro-USB port and for slot for microSD cards. It works with theuboot, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.
Operating system
NanoPi works with Debian systems. The drive of the device can be microSD card which can be purchased in our store.
|
Operating systems can be downloaded from the manufacturer's website. The manufacturer also provides guide for the installation of the system. |
Communication
The user has at his or her disposal:
- GPIO x 68 pin - outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins that support interfaces: I2C, SPI and UART.
- a slot for microSD - slot for microSD memory cards, on which installed can be the operating system.
Power
As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and the current of the used adapter shall not be less than 2.0 A. In our offer, you will find power supplies that meet these parameters, for example: the Extreme power supply of 3.1 A.
Starter set
The manufacturer has prepared a set of sensors and modules in a convenient chest that simplifies getting started with minicomputer.
The contents of the setMatrix Starter Kit- sold separately.
Specification |
|
| Model | NanoPi Core |
| Specification |
|
| Processor | Allwinner H5 |
| The core |
Quad-Core ARM Cortex A53 |
| Systems |
uboot, Ambian, DietPi, Lakka, Cali, OpenWrt, etc. |
| Clock frequency | 1.5 GHz |
| RAM |
1 GB DDR3, 32-bit |
| Memory |
8 GB of eMMC microSD card |
| Slot for GPIO |
68 pins of GPIO |
| Power |
5 V / 2 A - microUSB |
| Board sizes | 40 x 40 mm |
| Interfaces | |
| USB-Host |
3 x USB 2.0 on pins of 2.54 mm |
| Network interface | Gigabit Ethernet on pins of 2.54 mm |
| Video | - |
| Audio |
I/O port (4-pin, contained on pins of 2.54 mm) |
| Camera |
- |
| LCD | - |
| Communication |
UART, SPI, I2C, GPIO |
| The debugger |
The serial port on pins of 2.54 mm |
| Other |
status LEDs |
| Included |
2x goldpin 24-pin strip / 2.54 mm 1x goldpin 20-pin strip / 2.54 mm |
Useful links |
