Product description: Cytron MDD3A - dual channel motor controller DC 16V/3A
The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4V to 16 V.The controller works with logical voltage of 1.8 V, 3.3 V, 5 V and 12 V (PWM)so it can be controlled by any microcontrollersuchas Arduino or Raspberry.Forproper operation the module does not require an additional Arduino type controller,the controllercan be controlled by means of buttons on theboard.
The controller has built-in buttons for quick system testing.
|
Product compatible with Arduino For a sample code and detailed information, see theuserguide. |
Outputs of Cytron MDD3A - dual channel DC 16V/3A motor controller
The controller is equipped with a 6-pin 2.54 mm input from which it receives information from the microcontroller about the direction and speed of rotation of the motors and 6 screw connectors to which the motors and power supply are connected.Cytron MDD3Acan be controlled by inputsPWM. The logic voltage is 1.8 V, 3.3 V, 5 V or 12 V, is compatible with most controllers, such asArduino,Raspberry Pi...PLC.
| ARK connector | Description | 5-pin connector | Description |
|---|---|---|---|
|
M1A |
First engine connector, output A. |
M1A |
PWM1 signal input. |
|
M1B |
First engine connector, output B. |
M1B |
PWM2 signal input. |
|
VB+ |
Positive electrode - module power supply. |
5V0 |
5 V Output. |
|
VB- |
Negative electrode - module power supply. |
GND |
The weight of the system. |
|
M2A |
Second engine connector, output A. |
M2A |
PWM3 signal input. |
|
M2B |
Second engine connector, output B. |
M2B |
PWM4 signal input. |
The truth table shows how to feed the signal to the pins to control the motor.
| Input A (M1A/M2A) |
Input B (M1B/M2B) |
Output B (M1A/M2A) |
Output B (M1B/M2B) |
Engine |
|---|---|---|---|---|
|
Low |
Low |
Low | Low | Stoi |
|
High |
Low |
High | Low | Movement forward |
|
High |
High |
Low | High | Moving backwards |
|
High |
High | High | High | Stoi |
The controller is packed in a dedicated box with leads and their description.
Specification Cytron MDD10A - dual channel DC 30V/10A motor controller
- Supply voltage: 4 V to 16 V
- Voltage of the logical part: 1.8 V, 3.3 V, 5 V and 12 V
- Current per channel: 3 A (momentary 5 A)
- Number of channels:
- DC motor: 2
- Stepper motor: 1
- Full NMOS H bridge for better performance without heat sinks
- PWM speed control frequency up to 20 kHz
- 4 buttons for quick system testing
- Dimensions: 48 x 42 mm
- Weight: 14,5 g
Useful links |
