• EOL

RPI 3+ Compute Module Dev Kit: Raspberry Pi CM3+, I/O expansion

Index: FAR-14449 EAN: 765756931144

The Compute Module 3+ kit is a complete platform for Raspberry Pi Compute Module 3+ with all the necessary interfaces. It includes the Raspberry Pi Compute Module 3+ and the RPI Compute Module 3+ I/O prototype board.

RPI 3+ Compute Module Dev Kit: Raspberry Pi CM3+, I/O expansion
€124.50
€101.22 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Product description: RPI 3+ Compute Module Dev Kit: Raspberry Pi CM3+, I/O extension

The Compute Module 3+ kit is a complete platform for the Raspberry Pi Compute Module 3+ with all the necessary interfaces. It includes Raspberry Pi Compute Module 3+ 32 GB version and RPI Compute Module 3+ I/O prototype board.

L.p. Image Name
1 Raspberry Pi CM3+ - a miniaturized version of the popular Raspberry Pi 3B+ minicomputer. It has classic Raspberry capabilities with DDR2-SODIMM interfaces. CM3+ has BCM2837 1.2 GHz processor, 1 GB RAM, 32 GB eMMC memory and popular peripherals.
2 RPI 3+ Compute Module I/O - A prototyping board to connect the Raspberry Pi CM3 - Compute Module 3. It contains 120 GPIO pins, HDMI port, USB port, microUSB port, two camera ports and two display ports. It helps to design and test solutions based on CM3 module.
Raspberry Pi CM3+

RPI 3+ Compute Module Dev Kit: Raspberry Pi CM3+, I/O extension.

Raspberry Pi CM3+

RPI CM3+ Minicomputer Specification

  • Processor: Broadcom BCM2837 64-bit
  • Core: Quad-Core ARM Cortex A53
  • Clock speed: 1.2 GHz
  • RAM: 1 GB LPDDR2
  • Flash eMMC memory: 32 GB
  • Connector: 200 pin SODIMM
  • 48 pins GPIO
  • 2 x I2C
  • 2 x SPI
  • 2 x UART
  • 2 x SD / SDIO
  • 1 x HDMI 1.3a
  • 1 x USB2 HOST / OTG
  • 1 x DPI
  • 1 x NAND interface
  • 1 x 4-line CSI interface
  • 1 x 2-line CSI interface
  • 1 x 4-line DSI interface
  • 1 x 2-line DSI interface
  • 2 mounting holes 2.3 mm: spacing 61.6 mm
  • Module dimensions: 67.6 x 31 mm

Detailed module description available in technical documentation.

Specification for RPI CM3+ I/O Prototyping Board

  • Raspberry Pi 3+ Compute Module I/O
  • Power supply: 5V via microUSB
  • 120 GPIO pins
  • HDMI port
  • USB port
  • MicroUSB port
  • 2 camera ports
  • 2 display ports
  • MicroSD card port for use with Compute Module 3+ Lite
  • Module dimensions: 105 x 85 x 13 mm

Ready format for mounting in a housing!

This kit allows you to prototype electronic devices based on the Raspberry Pi Compute Module CM3+ single board minicomputer. It is a miniaturised version of Pi 3+ which offers the same hardware performance but in smaller size. The included I/O expansion board, allows you to take full advantage of the I/O system just like the full-sized Pi 3+, and the mounting holes allow for easy and stable mounting in your target application.

What devices can you build using the Pi Compute Module?

The Raspberry Pi Compute Module CM3+ is a veritable mine of electronic devices. Based on this module, you can build a wide variety of practical applications. Built-in SoC processor and RAM, will easily work in such prototypes as electrometric instruments for measuring electrical and non-electrical quantities at the level of accuracy required for professional use.

UC - RAM 1 GB
UC - freq 1.2 GHz

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: