NanoPi NEO Air WiFi - Allwinner H3 Quad-Core 1.2GHz + 512MB RAM + 8GB eMMC

Index: NNP-07435 EAN: 5904422335748

Miniature computer NanoPi in version Neo Air with Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Tile has a 512 MB DDR3 RAM, 8 GB eMMC, built-in wi-fi module and Bluetooth 4.0, and micro usb slot + 2 x USB host on pins 2.54 mm, 36 GPIO, connector for memory card microSD. Works with manufacturer's systems, u-boot and UbuntuCore.

NanoPi NEO Air WiFi - Allwinner H3 Quad-Core 1.2GHz + 512MB RAM + 8GB eMMC
€36.00
€29.27 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: FriendlyARM

Description

Miniature computer NanoPi in version Neo Air with processor of Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Tile has a 512 MB DDR3 RAM, 8 GB eMMC, built-in module WiFi and Bluetooth 4.0 and the slot for micro usb + 2 x USB Host on pins 2.54 mm,36 GPIO, connector for memory card microSD. Works with manufacturer's systems, u-boot and UbuntuCore.

 

Nano Pi Neo - Allwinner H3 Quad-Cor


The advantage of tile is its small size, the dimensions of the tiles 40 x 40 mm.

What it takes to run minicomputer NanoPi?

 

Operating system

NanoPi works with the systems selected by manufacturer: u-boot and UbuntuCore. The drive of device can be microSD card, which can be purchased in our store.

 

Operating systems can be downloaded from the manufacturer's website.

The manufacturer also provides guide around the installation of the system.

Communication

Minikomputer has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors of audio and video, the user has at his or her disposal:

  • 1x USB A + 2x USB Host on pins 2.54 mm, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB. The interfaces displayed on pinach can be connected using wires.
  • Wi-fi module, i.e. the possibility of direct connection to the network.
  • Bluetooth 4.0for communication in standard BT.
  • GPIO x 36 pinoutputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. Among them are the pins supporting interfaces: I2C, SPI and UART. The pins have to be soldered individually, goldpin raster strips of 2.54 mm can be purchased in our store.
  • a slot for microSDslot for memory card microSD on which the operating system can be installed.

Nano Pi Neo Air- GPIO

The distribution of the GPIO pins - pins have to be soldered individually, goldpin raster strips of 2.54 mm can be purchased in our store.

Power

As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the connector had a value of 5.0 and output current of the used power supply shall not be less than 2.0 A. In our assortment you will find power supplies that meet these parameters, for example: power supply Extreme 2.1 A.


 

Starter set

The manufacturer has prepared a set of sensors and modules in a convenient chest that simplifies getting started with minicomputer.

Matrix Starter Kit - zestaw startowy dla NanoPi i Raspberry PiThe contents of the set Matrix Starter Kit - sold separately.

Specification

Model NanoPi Neo Air
Specification
Processor Allwinner H3
The core

Quad-Core ARM Cortex A7

Systems

u-boot

UbuntuCore

Clock frequency 1.2 GHz
RAM

512 MB

Memory

8 GB eMMC

microSD memory card

GPIO Socket

36-pin connector

for self-soldering

Power

5 V / 2 A - microUSB

Tile sizes 40 x 40 mm
Interfaces
USB-Host

1 x micro-USB slot

2 x USB Host on pins 2.54 mm

Network interface Wi-fi 802.11 b/g/n
Communication Bluetooth 4.0
Video -
Audio

out on the GPIO connector

Commmunication

UART, SPI, I2C, GPIO, PWM

The debugger

Serial port 4pin / 2.54 mm

Additional

Built-in LED

Kit contents

  • 1x NanoPi NEO Air
  • 1x 2x12pin goldpin strip
  • 1x goldpin strip 1x12pin
  • 1x goldpin strip 1x8pin
  • 1x antenna

 

UC - Microcontroller Allwinner H3
UC - Core Cortex A7
UC - RAM 512 MB
UC - core 4. Quad Core
UC - Digital pins 36
UC - External memory eMMC 8 GB
UC - freq 1.2 GHz
UC - Ethernet yes
UC - WiFi yes
UC - USB 1x USB
UC - Bluetooth yes
UC - HDMI no
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface yes
UC - Linux yes
UC - Android no
UC - Windows no
Package width 11 cm
Package height 7.5 cm
Package depth 3 cm
Package weight 0.038 kg

Be the first to ask a question about this product!

Product reviews

NanoPi NEO Air WiFi - Allwinner H3 Quad-Core 1.2GHz + 512MB RAM + 8GB eMMC

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: