• EOL

Sipeed Tang Nano - FPGA development board GW1N-1

Index: SEE-15813 EAN: 5904422343835

Development board based on the GW1N-1-LV chip , which has 1152 LUT4 with 4 RAM addresses and 864 FF (Flip-Flop). The module has 72 kB of SRAM memory. Due to its small size the board does not have a DSP module. It is equipped with 34 I/O pins. The board is powered by a USB C connector. Programmable via JTAG interface using USB. Built-in FPC connector allows to connect the display.

Sipeed Tang Nano - FPGA development board GW1N-1
€10.50
€8.54 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio

Attention!

The product has been discontinued. Check other products in category.

Product description: Sipeed Tang Nano - FPGA development plate GW1N-1

Development board based on the GW1N-1-LV chip,which has 1152LUT4 with 4RAMaddressesand 864 FF (Flip-Flop).The module has72 kb of SRAM memory. Due to its small size the board does not have a DSP module, so complex calculations such as accumulation are not possible. It is equipped with 34I/Opins.The board is powered by aUSB Cconnector.

Szkielet płytki Sipeed Tango Nano

Sipeed Tang Nano backbone.

Sipeed Tango Nano is programmed via the JTAG interface using USB, without the need for an additional downloader. Built-in40-pin FPCconnector allows to connectthe display.

Main features of Sipeed Tango Nano board

  • The deal: GW1N-1-LV with 1152 LUT4 and 864 FF
  • 72 kb SRAM, 96 kb flash memory
  • 40-pin FPC connector for display connection
  • Built-in JTAG downloader
  • Does not support DSP
  • Small dimensions: 58.34 x 21.29 mm

Wymiary płytki Sipeed Tang Nano

Dimensions of Sipeed Tang Nano.

Specifications of Sipeed Tang Nano tiles

  • The deal: GWIN-1-LV:
    • LUT4: 1152
    • Flip-Flop: 864
    • SRAM: 72 kb
    • Flash: 96 kbp
    • PLLs+DLS 1+0
    • Core tension: 1,2 V
  • Programming: USB
  • Power supply: 5 V - USB C
  • Current consumption: up to 400 mA
  • Power circuit: each Bank has a separate LDO power circuit (except for BANK0/3). I/O level in BANK 1 and BANK 2 can be adjusted by changing the LDO circuit
  • Display: 40-pin FPC - built-in display backlight controller
  • I/O: 32-pin
  • PSRAM memory: 64 Mb 3.3 V
  • LEDs: built-in RGB LEDs
  • Button: 2 buttons 3 x 4 mm
  • Quartz: built-in 24 MHz quartz oscillator
  • Operating temperature: -30°C to 50°C
  • Dimensions: 58.34 x 21.29 mm

Voltage to 5.0 V
Voltage from 5.0 V
Package width 3.5 cm
Package height 6.5 cm
Package depth 0.4 cm
Package weight 0.009 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: