Lipol charger TP4056 1S 3,7V microUSB with protection

Index: MOD-06944 EAN: 5904422375355

Simple charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7V. The system is powered via a microUSB connector or by wires. The module is protected against excessive discharge below 2.5 V and excessive current consumption above 3 A.

Lipol charger TP4056 1S 3,7V microUSB with protection
€1.50
€1.22 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description:Li-Pol TP4056 charger TP4056 single 1S 3.7V microUSB cell with protections

Simple charger for 1-purposelithium-polymerbatteries with a nominal voltage of 3.7V. Maximum charging current is 1000 mA. The system is powered via the microUSB connector or via wires connected to the IN+ and IN- inputs. The module is protected against excessive discharge below 2.5 V and excessive current consumption above 3 A.

Outputs

The module has 6 solder fields and a microUSB connector.

Pin Description
IN+ Supply voltage from 4.5 V to 5.5 V.
IN- The weight of the system.
BAT+, BAT- Connectors for connecting Lipol 3.7 V batteries.
OUT+, OUT- Connections for connectionpowered. When too low a battery voltage is detected, the system switches the power supply from BAT connectors toIN.

Specification

  • Layout: TP4056
  • Power supply voltage: (microUSB or IN connectors) from 4.5 V to 5.5 V
  • Charging voltage: 4,2 V
  • Maximum charging current: 1 A
  • Socket: microUSB(microUSB cablecan be purchased separately)
  • Two signal lights
    • Red: charging
    • Green: full charge
  • Protection against discharge below 2.5 V
  • Protection against current consumption over 3 A
  • Module dimensions 26 x 18 mm

Attention!

Before connecting the battery, check the polarity of the plug.

Test 3
Package width 6 cm
Package height 0.5 cm
Package depth 9 cm
Package weight 0.002 kg

Wojtek

02/14/22

Question: Is it suitable for lithium-ion batteries?
Answer: There should be no problem using the charger for these purposes.

Product reviews

Lipol charger TP4056 1S 3,7V microUSB with protection

5/5

Average grade

16

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Ludwig 22.03.2024 Confirmed purchase Translated review
good and cheap
Arkadiusz 17.04.2023 Confirmed purchase Translated review
Great product replaced the broken charging input on the speaker
Ja 21.02.2023 Confirmed purchase Translated review
Everything's fine.
Paweł 10.02.2023 Confirmed purchase Translated review
Everything is great, works as it should be. Nice and professional service. I recommend
Małgorzata 17.01.2023 Confirmed purchase Translated review
5/5 super
Jan 10.10.2022 Confirmed purchase Translated review
QUALITY B. GOOD WORKS AS IT DESIGNED. RATING 5/5
Mikołaj M. 22.06.2022 Confirmed purchase Translated review
It works as it should, maybe it heats up a bit but it can be solved :)
Waldemar S. 05.05.2022 Confirmed purchase Translated review
The product was used for a larger project as a charger. Good workmanship and fulfills the role it was intended for.
Karol P. 09.10.2021 Confirmed purchase Translated review
I recommend
Kamil W. 07.10.2021 Confirmed purchase Translated review
all git
Andrzej B. 30.08.2021 Confirmed purchase Translated review
ok I recommend
Michał D. 22.08.2021 Confirmed purchase Translated review
It charges the 3.7V battery without any problems, the overcharging protections work accordingly.
Jakub G. 28.04.2021 Confirmed purchase Translated review
Cool shallow
Roman K. 28.03.2021 Confirmed purchase Translated review
super!
Grzegorz 10.04.2024 Confirmed purchase
Jerzy 05.03.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: