LED RGB WS2811 - IP65 60LED/m, 14,4W/m, 12V - 5m - black

Index: LED-07152 EAN: 5904422360061

Individually addressed RGB LEDs located in a 5 m strip with a density of 60 diodes per meter. Each pixel consists of three RGB LEDs and can emit a color from 24-bit palette. To use the module, one microcontroller's pin is sufficient. The strip is equipped with a black ribbon.

LED RGB WS2811 - IP65 60LED/m, 14,4W/m, 12V - 5m - black
€29.50
€23.98 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description

Individually addressed RGB LEDs located in a 5 m strip with a density of 60 diodes per meter. Each pixel consists of three RGB LEDs and can emit a color from 24-bit palette. To use the module, one microcontroller's pin is sufficient. (for example,Arduino).

 

The LEDs are placed densely, at a distance of about. 17 mm so the brightness is high. The system is supplied with the voltage of 12 V, consumes about 1.2 A per meter (14.4 W). The circuit has the possibility of crossing every third diode.

 

 

The used communication protocol allows the serial connection of the LEDs. Another circuit should be connected to the output connector, connecting respectively 12V, GND and DOUT with DIN. The manufacturer notes that when working with more than 500 LEDs, in the system of the Arduino Unomay not be enough RAM. You should also note that every following matrix will require increasing the performance of the power source.

 

Connection

The device has a 3-pin connector consisting of the following conclusions:

  • GND (white wire)- module weight
  • 12V (red wire)- voltage supply, for one matrix, you should connect the source with the current delivery not less than 1.0 A for each meter of chain
  • DIN (green wire)- digital control signal from the microcontroller

 

 

The product is compatible with Arduino and Raspberry Pi

 

Installation of the Adafruit library for Arduino:

  1. Download the library fromthe website GtitHubby clicking the buttonDownload ZIP
  2. Unzip the downloaded ZIP file, the result should be the folder that contains the files: Adafruit_NeoPixel.cpp, Adafruit_NeoPixel.h and other subfolders
  3. Rename the main folder to: Adafruit_NeoPixel
  4. Move the entire folder to the directory that contains the Arduino library, by default, it should be on the path: /Documents/Arduino/Libraries
  5. Start the Arduino IDE again, the library will appear in the Menu: File -> Examples

 

First run - examples simple

  • Run the test program by choosing in the Arduino environment:
    • File -> Examples -> Adafruit_Neopixel -> simple
  • Select the pin which will control the LEDs. By default, it is the pin 6:
    • Line 11#define PIN 6
  • Select the number of pixels that must be controlled. By default, it is 16:
    • Line 14#define NUMPIXELS 16
  • Upload a program into Arduino. Pixels should activate one after another, up to the amount specified in line 14.
  • If you want to change the illuminating color, enter different values into the function:
    • Line 40pixels.setPixelColor(and pixels.Color(0,150,0))
      In parentheses are the components of RGB, the maximum value of each is 255
  • Change of the speed of illumination of individual pixels is possible by editing the value:
    • Line 21int delayval = 500;

 

 

Panel WS2811 LED in combination with anArduino Uno.

 

Specification

  • Supply voltage: 12 V
  • Power: 14.4 W/m
  • Current consumption: 1.2 A per 1 meter of chain for a single diode, with white color,
  • The LEDs used in the: LED-RGB-SMD5050 WS2811
  • The amount of addressed pixel: 3 LEDs
  • Tape color: black
  • Resistance to external conditions: IP65 (silicone cover)
  • Chain length: 5 m
  • Chain width: 10 mm

 

Cable length 5.0 m
Voltage to 12.0 V
Voltage from 12.0 V
Voltage nominal 12 V
Nominal power 14.4 W
Tightness class IP65
LED - color RGB
LED - type WS2811
LED - digital yes
LED - LEDs 60 per meter
LED lens clear
LED wavelength RGB
Package width 18 cm
Package height 1.8 cm
Package depth 21 cm
Package weight 0.023 kg

Be the first to ask a question about this product!

Product reviews

LED RGB WS2811 - IP65 60LED/m, 14,4W/m, 12V - 5m - black

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: