• EOL

NeoPixel NeoMatrix 8x8 - 64 LED RGB - WS2812B individually addressed - Adafruit 1487

Index: ADA-02420

The matrix consists of 64 individually addressed RGB LEDs arranged in 8 rows and 8 columns. Each pixel may emit a color from 24-bit palette. For control, the module needs just one microcontroller output.

NeoPixel NeoMatrix 8x8 - 64 LED RGB - WS2812B individually addressed - Adafruit 1487
€45.00
€36.59 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products incategory.

Description

The matrix is composed of 64 RGB LEDs of which each can be managed separately to reflect the color from 24-bit palette. The elements are evenly distributed in eight rows and eight columns. The module needs only one pin of any microcontroller (e.g.Arduino). The system is powered by 5 V, consuming not more than 60 mA for each led (white color). The manufacturer recommends to use apower supplywith maximum output current of at least 2 A.

 

 

Applied communication protocol enables the serial connection of the matrix. Another NeoMatrix should be connected to the output connector, combining with each other respectively, 5V, GND, DOUT and DIN. The manufacturer notes that when using four or more matrices, there may not be enough RAM in the system Arduino Uno. You should also note that every following matrix will require increasing the productivity power.

 

Connection

The device has a 3-pin connector consisting of the following outputs:
  • GND- module's ground
  • 5 Vsupply voltage, for one matrix you should connect a source with a maximum output current of at least 2 A, for example,power supply 5V/2,5; if in the project there is a situation when all LEDs light up simultaneously in white color, then you need to use the adapter at least 3.5 A - each led then consumes a maximum current of 60 mA
  • DIN- digital control signal from the microcontroller

 

The product is compatible with Arduino

The manufacturer providesthe Arduino library in GitHubfor modules NeoPixel along withthe connection examples.

 

Specification

  • Supply voltage: 5 V
  • Current consumption: no more than 60 mA for a single diode, when all lit up in white
  • Applicable light: LED RGB WS2812B
  • Dimensions: 71,2 x 71,2 x 3.3 mm
  • Weight: 25 g

 

 

Screen - type Matryca LED
Screen - diagonal 4.0''
Screen - interface GPIO
Screen - touch no
Screen - resolution 8x8 px
Length 71 mm
Voltage to 5.0 V
Voltage from 5.0 V
Voltage nominal 5 V
Nominal power 4 W
LED - color RGB
LED - type WS2812B
LED - digital yes
LED - LEDs 64
LED lens clear
LED wavelength RGB
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: