Touch screen Adafruit LCD display 3,5'' 320x480px + microSD reader - Adafruit 2050

Index: ADA-02666 EAN: 5904422309206

3.5" graphic LCD TFT touch screen display with 320 x 480 px resolution and 18-bit colour depth. It works with a voltage of 3.3 V and 5V and communicates via the SPI bus. Additionally, the board has a micro SD memory card reader.

Touch screen Adafruit LCD display 3,5'' 320x480px + microSD reader - Adafruit 2050
€54.50
€44.31 tax excl.
Goods pending acceptance - available within a few days
Waiting for delivery
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino

Product description:TFT LCD 3.5'' 320x480px Adafruit touch screen display with microSD reader

3.5" TFT LCD touch screen graphic display with 320 x 480 px resolution and 18-bit colour depth. It works with both 3.3 V and 5 V. Additionally, there is a micro SD memory card reader on the board.

The screen is based on the HXD8357D controller, it has a built-in RAM memory, so the microcontroller is not loaded with the display control. The device can communicate in two modes: 8-bit and through the SPI bus. For 8-bit mode eight digital data lines and four control lines must be connected. SPI requires only five transmission lines, but is slower than 8-bit communication. In addition, four additional pins are required to operate the touch screen.

Wyswietlacz dotykowy TFT LCD 3,5

The leads areholes for the includedgoldpin connector- 2.54 mm raster (for self-soldering). They allow for connection of the display through wires or plugged into the contact plate.

Thanks to the built-in voltage converter the system works with both 3.3 V and 5 V logic. The installed slot allows to provide graphic files on micro SD card with FAT16/FAT32 system.

Product compatible with Arduino

On Adafruit website you can finda user's guidetogether with theArduino userlibrary.

Exits

The device can work in two modes: 8-bit communication and SPI, SPI outputs are shown in the table below. Details of 8-bit connection can be found in the tutorial.An example of a touch screen connection is available inthe user guide.

Pin Description
VIN Screen illumination: 3.3 V to 5 V.
GND The weight of the system.
MISO SPI bus input data line.
SCK SPI bus clock line.
MOSI SPI bus output data line.
CS SPI bus device selection - chip select for display.
D/C Transmission selection pin: data/command.
RST Reset the system.

3.5'' TFT LCD touch screen specification

  • Supply voltage: 3.3 V to 5.0 V
  • Output operating voltage: 3.3 V to 5.0 V
  • 4-wire touch screen
  • The driver:HXD8357D
  • Diagonal screen: 3.5 inches
  • Resolution: 320 x 480 px
  • Deep in color: 18-bit
  • White LED backlighting with controllable brightness via PWM signal
  • Communication: SPI or 8-bit mode
  • Built-in slot for microSD memory card

Screen - type LCD TFT
Screen - diagonal 3.5''
Screen - interface SPI
Screen - touch yes
Screen - resolution 480x320px
Package width 11 cm
Package height 8 cm
Package depth 3 cm
Package weight 0.075 kg

Be the first to ask a question about this product!

Product reviews

Touch screen Adafruit LCD display 3,5'' 320x480px + microSD reader - Adafruit 2050

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: