- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Khadas Edge Max - Rockchip RK3399 WiFi, Bluetooth Cortex A72/A53 + 4GB RAM/128GB eMMC
Khadas Vim Max minicomputer equipped with RockchipRK3399 Dual-core A72 1.8 GHz and Quad-core A53 1.5 GHz, has4 GB of RAMand128 GB of eMMC memory. The board is equipped withWiFiAP6398SandBluetooth 5.0. The module includes such connectors as:: Ethernet Gigabit, HDMI, USB 3.0, USB 2.0, 314-pin contact connector in MXM3 standard. Powered by 5 V to 20 V via USB C.
Khadas Edge kit contents.
Operating system for Khadas Edge
The manufacturer has prepared such systems as: Android Oreo, Ubuntu 18.4, Debian 9.0 and more to work with Khadas Edge module. The system can be installed directly on the internal memory of the minicomputer.
|
Operating systems can be downloaded fromthe manufacturer's website. |
What do I need to run the Khadas minicomputer?
- Power supply with USB plug type C- from 5 V to 20 V (recommended 5 V) with current capacity 2 A. The device has a USB C 3.0 connector with PD support.
- HDMI cable- to connect the screen.
- Mouse and keyboard- to control and enter data into the device.
Communication in Khadas Edge
The distribution of elements on the Khadas Edge.
Front (blue marking):
| Designation | Element | Description |
|---|---|---|
| 1 | USB A | USB 3.0. |
| 2 | USB C | USB 3.0, Display Port V1.2, input 5 V to 20 V (USB PD), can be used for system updates. |
| 3 | HDMI 2.0 | Female Type A, up to 4K@60 Hz, HDCP 2.2. |
| 4 | USB C | USB C with power input from 5 V to 20 V (USB PD). |
| 5 | USB A | USB 2.0. |
| 6 | Fan connector | 4-pin connector using PWM. |
| 7 | Reset button | Forcing the plate to reset. |
| 8 | Function button | Press 3 times for 2 seconds to enter Mask mode. |
| 9 | Power button | Used to run the plate. |
| A | 314-pin connector | Used to place the plate in theCaptain extension. |
| B | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
| C | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
Rear (red markings):
| Designation | Element | Description |
|---|---|---|
| 1 | Li-Pol battery connector | It is used to power the module from theLi-Pol battery. |
| 2 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
| 3 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
| 4 | Mounting area M2x4 | Used to mount a heat sink or extension plate. |
| 5 | FPC B connector | 10-pin, 0.5 mm raster, USB, I2S (8 channels), I2C, MCU IO. |
| 6 | FPC A connector | 10-pin, raster 0.5 mm, UART, I2C, SPI, SDMMC, ADC, PWM, I/O, GPIO |
| 7 | M-Register | Allows eMMC to enter MaskMode. |
Power supply in Khadas Edge
The Khadas Edge mini-computer is powered by a C-type USB connector from 5 V to 20 V. The manufacturer recommends 5 V / 2 A.In our offer you will findpower supplies meeting these parameters. The module can also be powered byLi-Pol batterythrough a dedicated connector.
Khadas Edge Max specification and comparison
| Basic information | ||
|---|---|---|
 |
 |
|
| Model | Raspberry Pi 4 model B | Khadas Edge Max |
| Edition | 6 - 2019 r. | 2018 r. |
| Technical specification | ||
| Core | Quad-Core ARM Cortex-A72 | Quad-Core ARM Cortex-A53 Dual-Core ARM Cortex-A72 |
| Operating systems | Linux Raspbian Windows 10 loT |
Debian Ubuntu Android etc. |
| Clocking | 1.5 GHz | 1.5 GHz + 1.8 GHz |
| Memory RAM | Three versions
|
4 GB DDR4 |
| Memory | microSD card | 128 GB eMMC memory |
| GPIO socket | 40-pin connector (2x20 pin) raster 2.54 mm |
Connector FPC A 10-pin raster 0.5 mm FPC B connector 10-pin raster 0.5 mm 314-pin MXM3 connector |
| Power supply |
|
5 V to 20 V / 2 A - USB PD USB type C |
| Dimensions of the tiles | 85 x 56 x 17 mm | 82 x 57.5 x 5.7 mm |
| Interfaces | ||
| USB interface | 2x USB 2.0 - socket type A 2x USB 3.0 - socket type A |
1x USB 2.0 - socket type A 1x USB 3.0 - socket type A |
| Network interface | Ethernet port 100/1000 Mbps | 10/100/1000 Mbps Ethernet port RTL8211FD |
| WiFi interface | Dual Band 2.4 GHz and 5 GHz 802.11 b/g/n/ac |
AP6398S 802.11a/b/g/n/ac 2X2 MIMO with RSDB |
| Bluetooth | Low Energy, BLE 5 | Bluetooth 5.0 |
| Camera | CSI socket | - |
| Touchscreen display | DSI socket | - |
| Video | 2 x microHDMI H.265 4K 60 fps H.264 1080p 30 fps OpenGLES 1.1, 2.0, 3.0 |
HDMI 4K |
| Communication | UART, SLEEPING, I2C, GPIO | USB, I2C, SPI, I2S, SPDIF, ADC, STM8S MCU IOs |
| Additional | - | Tensorflow, Android NN |
