- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
| Feature | Description |
|---|---|
| Size | 9 x 9 x 3 cm |
| Range | up to 1000 meters (for Crazyradio PA) |
| Stabilization | 9 axis |
| Flight time | 7 minutes |
| Charging time | 40 minutes |
| Management |
Bluetooth LE - via a smartphone or through the additional module CrazyRadio PA |
| Material | polymeric material |
| Camera | no |
| Memory card | no |
Description
Little quadrocopter with 9-axis stabilization system of the flight, which you can fly both indoors and outdoors. The project is a development platform for flying models. It can be controlled with your smartphone via Bluetooth LE. The kit requires assembly before flight, but no soldering.
Crazyflie 2.0 is an open project with full source code and documentation. It was designed for development purposes. It has functions that enable, for example, registration and setting parameters in real-time. Full development environment available on the virtual machine, so there is no need to install additional tools. In addition, there are APIs in Java, Ruby, C / C++, C#, and JavaScript. The manufacturer also offersan additional module,supporting the development of the drone.
Control of the Crazyflie 2.0 can be carried out with a device with Bluetooth LE or by using the Crazyradio PA modules. Full drone capacitiy is ready when you connect it to a computer using the Python client. It enables preview of flight parameters, graphic representation of the data as well as configuring various parameters. In addition, you can control the device using any remote control or joystick with at least 4 analog axes.
Crazyflie 2.0 has a 2x10 pin connector to connect extension cards. More information inthe documentation. The kit requires assembly before first use.
Specification
- Communication: Bluetooth LE or module CrazyRadio PA
- Microcontroller STM32F405 Cortex M4
- Frequency: 168 MHz
- RAM memory: 192 KB SRAM
- Flash Memory: 1 MB
- NRF51822 wireless module and the power control unit
- Cortex M0
- Frequency: 32MHz
- RAM Memory: 16 KB SRAM
- Flash memory: 128 KB
- MicroUSB
- Battery charging: 100 mA / 500 mA / 980 is
- USB interface
- Partial USB OTG: no 5 V output
- Unit IMU:
- 3-axis gyro, magnetometer and accelerometer (MPU-9250)
- The LPS25H pressure sensor
- Flight time: 7 minutes
- Charging time: 40 minutes
- Maximum load: 15 g
- Expansion / connectivity:
- DC: 3 V / 100 mA
- GND
- VCOM: not adjustable from the batteries or USB, max. 1A
- VUSB: for output and input
- I2C: 400 kHz
- SPI
- 2 x UART
- 4 x GPIO / CS for SPI
- 1-wire
- 2 x GPIO connected to the nRF51
- Memory EEPROM: 8 KB
- Equipped with a battery li-pol, 3.7 V, 240 mAh
- Dimensions: 92 x 92 x 29 mm
- Weight: 27 g
Included
- Quadrocopter CrazyFlie 2.0
- 10 propellers
- 5 mounts for the motors
- 5 motors
- Lipol battery 240 mAh
- 2 short straps goldpin 1 x 10, 8 mm pitch 2 mm
- 2 long straps goldpin 1 x 10, 14 mm, pitch 2 mm
- Board with space for batteries
Useful links |
