- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - Vertigo
PETGfilamentin blackcolour with glitter,produced by Fiberlogy.PETGmaterial is characterized by high mechanical strength and resistance to chemicals. It is often used in printing containers, housings and decorative elements. The weight of the filament wound on a spool is 0.85 kg.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
Thanks toits glycol content, PETG filtration has increased resistance to mechanical damage caused by impacts or falls. It is also resistant to salt, alkaline substances and acids. This type of filament does not require a closed printer working chamber.
In this video, we explain the characteristics of the selected filtering elements in order to facilitate the selection of the type of filament to your expectations.
Suggested printing parameters of the filter
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Black with glitter |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Spool - material | PETG |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |
