- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The encoder generatesthe three-phase, rectangular impulse ABZ signal, through the turn of the shield with the transoptorem which you can interpret using a microcontroller, e.g. Arduino , andread the direction and speed of the rotating shaft. It allows you to add feedback to the control system of the engine. This type of encoders are often used in the balancing works, they can also be used as a very accurate knob. The resolution is 1000 impulses per revolution. The maximum rotation speed is 6000 rpm.
Specification
- Supply voltage: 5 V to 24 V
- Encoder resolution: 1000 impulses per revolution
- Rotation speed: max. 6000 rpm
- Starting current: 9 A
- Current under load: 35 mA max.
- The output phases: A, B, Z
- Output type: NPN
- Protection against reverse polarity
- The short-circuit protection
- Protection class: IP50
- Case: ABS
- Operating temperature: -10 °C to 70 °C
- Storage temperature: from -25 °C to 85 °C
- Humidity of operation and storage: 35 % to 85 RH
- Cable length: 2 m
- Dimensions: 59L x 40D mm
- Weight: 100 g
Pins
- Brown - motor's supply
- Black - output A of the encoder
- White - output B of the encoder
- Orange - the output Z of th encoder
- Blue - 0 V (common)
- Shield - the ground GND
Useful links |
