- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Product description:RaspberryhousingPi 4B-VESA MIS D - acrylic black - PiHut TPH-006.
Acrylic housing forRaspberry Pi 4B. The enclosure has been made according to theVESA MIS Dstandard, which allows mounting the enclosure together with the mini-computer on the back of each screen marked as VESA MIS D-compliant, i.e. with a distance between the holes equal to75 mmor100 mm.
Raspberry Pi 4Benclosure compliant with VESA standard.
Installation of the enclosure
- Remove the protective film from the housing components before installation.
- Attach shorter distances to the largest lower panel using 4 mm screws.
- Place the Raspberry Pi so that the ends of the distances go through the mounting holes in the minicomputer plate.
- Screw the longer distances to the endings already laid out.
- Insert the side elements into the prepared cut-outs in the lower panel.
- Place the upper part of the casing so that it will fit into the knobs of the side elements.
- Tighten the upper part of the casing with screws to the longer distances.
- Turn the whole thing to the monitor with the nylon spacers and screws.
Housing specifications
- VESA MIS D standard
- 100 x 100 mm
- 75 x 75 mm
- Material:
- Upper and lower part: 3 mm thick transparent acrylic
- Side elements: 3 mm thick black acrylic
- External dimensions: 110 x 110 x 33 mm
- Also includes rubber feet
Useful links |
