- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Pushing electromagnet powered with the voltage of 12 Volts with the power of 1.8 W. It can push out a mass of 0.1 kg with a standard earth acceleration of 9.8 m/S2. The diameter of a pushing part is 5 mm and a diameter of crank is 1.6 mm. Pushed is the part with the crank.
The device can be used as an actuator controlled with any microcontroller, e.g.Arduino. Please note that an electromagnet consumes too much power to connect it directly to the pins of the microcontroller. For this purpose, you can userelay,optocoupler ortransistor amplifier.
The electromagnet is available in two colors sent randomly.
|
Attention! The manufacturer recommends maintaining a good heat dissipation from the housing, because with the temperature rise of the coil, the force that pushes, decreases. |
Specification
- Supply voltage: 12 V
- Power: 1.8 W
- Current consumption: approx. 150 mA
- Body dimensions: 16.2 x 15 x 20 mm
- Push force: 0.1 kgf (pushes a weight of 0.1 kg for the gravitational acceleration of 9.8 m/S2)
- The wires with insulation removed at the ends with the length of about 6 cm.
- Weight : 20 g
