- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Display of e-paper type with a diagonal of 4.3". E-Ink technology with a resolution of 800 x 600 px. Works with voltage from 3.3 V to 5.0 V, communicating via a simple serial UART interface. Kit includes compatible cables with female ends, which facilitate the connection of your display. The device has a set library of fonts, built-in Flash memory 128MB and the installation of 4 gray levels.
Thanks to the technology of e-paper, the device does not tire your eyes like traditional displays. They can be used for reading e-books and e-journals.
Key features
- The module is easy to use, communicates using basic serial UART interface i.e. RX and TX.
- The displays work with a voltage of 3.3 V and 5 V.
- The device consumes less than 5 mA current
- There are font librariesinstalled in 32, 48 and 64 px (including Chinese and English characters).
- The board has a built-in NAND Flash memory with capacity of 128 MB, which allows you to store fonts and images.
- The SD card slot allows you to store large files on storage devices.
- The manufacturer provides software that allows you to control the device with PC via converter USB - UART.
- External dimensions-118 x 75 mm.
Connection
The module has 6 pins derived on the connector ribbon. Included is an adapter with a traditional female ends that allow you to connect the system to goldpin connectors raster 2.54 mm.
| Pin | Cable | Arduino | Description |
|---|---|---|---|
| 6 | RED | 5V | Supply voltage from 3.3 V to 5 V. |
| 5 | BLACK | GND | The ground of the system. |
| 4 | WHITE | RX | Data line UART. |
| 3 | GREEN | TX | Data line UART. |
| 2 | YELLOW | D2 | Standbymode. |
| 1 | BLUE | N/C | Reset, you can leave not connected. |
In the case of usingArduino, we should remember that the kit includes a wire and socket. Therefore, the necessary wires are male-male, for example,a set of 65 PCs.
|
Useful links |
