ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032

Index: PLL-14234 EAN: 5904422366698

Current sensor operating in the range from -30 to 30 A, based on the Hall effect. Input voltage is from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.

ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032
€8.50
€6.91 tax excl.
Available
Shipping in 24 hours
PayPal payment
ACHS current sensor - current:
Manufacturer: Pololu
Compatibility: Arduino

Product description: Sensor of the current ACHS-7123

The sensor is based on Hall effect, itis suitable to use in 5 V systems. The minimum sensor's supply voltage is 4.5 V, maximum - 5.5 V.

Czujnik prądu ACHS-7123

The main features of the system

  • The system was designed for the current flowing in both directions (from -30 to 30 A), in our offer available are alsoother versions.
  • A small losses of power
    • low resistance of the conductive path (0,7)
    • the PCB is made of copper with a thickness of 70µm
  • The current paths are isolated from a current path
    • The possibility to install anywhere
  • Work in a wide temperature range from-40 °C to 110 °C
  • Accuracy at room temperature: 1,5 %
  • Bandwidth of up to 80 kHz (reduction by using the appropriate capacitor)

The connection method of the system

The sensor requires connecting of a voltage supply from 4.5 V to 5.5 V over the fields VCC and GND. The output is analog voltage proportional to measured current (66 mV/A, centered at 2.5 V).

  • Input current (IP+ and IP-)
  • The logical power (VCCandGND)
  • Sensor's output (OUT)

Czujnik prądu ACHS-7123

FILTER pin allows youto configure the bandwidthof the board by adding a capacitorCFto ground in parallel with a capacitor of 1 nF. Without the additional filter capacitor, the transmission bandwidth is 80 kHz. More information about the impact of the external capacitor of the filter on the bandwidth, is inthe catalogue's note.

Charts and dimensional diagrams 

Schemat czujnika prądu ACHS-7123

Diagram with dimensions is availablehere(PDF)

Technical characteristics of the current sensor

  • Supply voltage: 4.5 V to 5.5 V
  • Suitable to use in 5 V systems
  • Sensitivity of power supply: 0,066 V/A
  • Supply current: 15 mA
  • Dimensions: 17,8 x 20,3 mm

Package width 8.6 cm
Package height 7.6 cm
Package depth 0.5 cm
Package weight 0.002 kg

Be the first to ask a question about this product!

Product reviews

ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032

4.5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Michał M. 13.04.2022 Confirmed purchase Translated review
okay
Wiktor S. 20.04.2021 Confirmed purchase Translated review
Everything's fine.

Customers who bought this product also bought:

Products from the same category: