Step-Down Voltage Converter D36V28F6 - 6V 2,7A - Pololu 3783

Index: PLL-17172 EAN: 5904422372224

A step-down converter with a supply voltage of 6.3 V to 50 V. The output voltage is 6 V and the current capacity is 2 A to 4 A, typical is 2.7 A. The module dimensions are 20 x 18 mm.

Step-Down Voltage Converter D36V28F6 - 6V 2,7A - Pololu 3783
€18.50
€15.04 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu

Product description: D36V28F6 - Step-down converter - 6V 2,7A - Polyol 3783.

A step-down converter with a supply voltage of 6.3 V to 50 V.The output voltage is 6 V and the current capacity is 2 A to 4 A,typical is 2.7A. The module dimensions are 20 x 18 mm.

D36V28F6 inverter outputs

Pin Description
VIN Input voltage.
GND Mass potential.
VOUT Output voltage.
ENABLE The low-voltage state (below 1 V) will cause the system to go into a low energy consumption state (approx. 10 μA). The pin is pulled to the supply voltage through a 270 kΩ resistor, which makes the system switched on by default.
PG Pin "Power Good" open-drain. It goes into a low state when the output voltage drops below 85 % of its nominal value. If this pin is used, a pull-up resistor, e.g. 10 kΩ, must be connected.

Przetwornica step-down D36V28F6

The inverter has connectors that are described on the board. The connectors are spaced at a distance of 2.54 mm. The device can be plugged directly into thecontactboard,connected with wires orsoldered intoa dedicated PCB.

Przetwornica step-down D36V28F6

D36V28F6 converter.

Inverter system efficiency

The inverter has an efficiency of about 85% - 95%, it is defined as the ratio of output power to input power (Power out)/(Power in). This parameter is very important when working with portable energy sources, where time is counted per charge cycle.

Sprawność przetwornicy D36V28F6

System efficiency graph.

Specification of the step-down converter D36V28F6

  • Input voltage: 6.3 V to 50 V
  • Output voltage: 6 V
  • Accuracy of output voltage: 4%
  • Continuous output current: 2,7 A
  • Efficiency of 85% - 95%
  • Protection against inverse polarity and against too high a current, voltage and temperature
  • Switching frequency: approx. 500 kHz
  • Soft-start function
  • Two 2.2 mm (M2) mounting holes
  • Dimensions: 20 x 18 mm
  • Weight: 3,3 g

Przetwornica ze złączami

The set includes an inverter and connectors for self-soldering.

Length 20 mm
Width 18 mm
Height 9 mm
Voltage to 6.3 V
Voltage from 50.0 V
Voltage output from 6.0 V
Output voltage to 6.0 V
Current 2.7 A
Package width 8 cm
Package height 9.5 cm
Package depth 1 cm
Package weight 0.005 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: