- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
OpenMV Cam is a small, microcontroller board which allows you to easily deploy applications using the mechanical view camera. It uses the STM32F765VI ARM Cortex M7 chip. It supports three image formats, the maximum resolution is 640x480 pixels, it displays up to 120 frames per second. You can easily take pictures and videos outdoors or use the computer vision algorithm to understand how to control the I/O pins. Board is programmable in Python language.
Key features
- Full speed of USB interface (12 MBS). After attaching to the computer, the camera will appear as a new virtual device on COM port and data carrier.
- MicroSD card slot allows to read and write at speeds of up to 100 MBPS what allows you to record video to the card.
- The SPI bus can run at a speed of 54 MBPS, which allows you to transfer images from the board to the LCD display, wi-fi shield or other microcontroller.
- I2C bus, CAN bus and asynchronous serial bus allows for the communication with other microcontrollers and sensors.
- 12-bit ADC and 12-bit DAC.
- 3x I/O for servo control.
- Interrupts and PWM on each I/O pin (on board are 10 I/O pins).
- RGB LED and two IR LEDs with the high power of 850 nm.
- The kit includes 2x goldpin strap.
Application
- Tracking color
- Face recognition
- Eye tracking
- Tracking tags
- Optical motion
- Detection / decoding QR code
- Decoding barcodes
- Detection of line
- Detection of circles
- The detection of rectangles
- Image capture
- Video recording
Specification
| Specification | |
|---|---|
| Processor |
ARM® 32-bit Cortex®-M7 PROCESSOR w/ Double Precision FPU
216 MHz (DMIPS 462)
|
| RAM | 512 KB |
| Flash | 2 MB |
| Image formats supported |
Grayscale
RGB565
JPEG (and BAYER)
|
| The maximum resolution supported |
Grayscale: 640x480 and below
RGB565: 320x240and below
Grayscale JPEG: 640x480and below
RGB565 JPEG: 640x480and below
|
| Lens |
Focal length: 2.8 mm Aperture: F2.0 HFOV: 70,8° Mount: M12 * 0.5 IR filter: 650 nm (removable) |
| Electric information |
All pins have tolerance of 5 Volts with a 3.3 V output All the pins can load up to 25 mA P6 has not a tolerance of 5 V in the mode ADC or DAC Between pins, can be flow of up to 120 mA VIN may have a voltage from 3.6 to 5 V Do not consume more than 250 mA from the 3.3 V bus |
| Dimensions | 45 x 36 x 30 mm |
| Weight | 16 g |
Useful links |
