• EOL

32u4 Feather Adalogger with microSD card reader, compatible with Arduino - Adafruit 2795

Index: ADA-05414 EAN: 5904422354343

A small module with a microcontroller AVR Atmega 32u4 known from the Arduino Leonardo. Feather is designed for portable projects. On board is also a microUSB connector, through which the system can be programmed via the Arduino IDE environment. Slot for microSD memory card provides storage of large amounts of data.

32u4 Feather Adalogger with microSD card reader, compatible with Arduino - Adafruit 2795
€29.50
€23.98 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit

Attention!

The product has been discontinued. Check other products in category.

Description

A small module with a microcontroller AVR Atmega 32u4. Feather is designed for portable projects. Thanks to the microUSB connector and uploaded bootloader, the module can be programmed directly fromthe Arduino IDE environment. Board has a small size (51 x 23 x 8 mm) can be powered by voltage from USB port or from rechargeable LiPol battery3,7 V LiPol. The module has a slot for microSD memory cards, which allows it to store large amounts of data (memory cardsold separately).

 

Check out how to start playing with the Adafruit Feather!

 

Mobile projects

Controller Feather is designed for mobile projects. Thanks to the integrated connector, it is possible to power it from the rechargeable LiPol battery3.7 V. The battery voltage was led through an analog pin, so you can constantly monitor the state of charge of the lipol. Also available is powering from the microUSB port.

 Adafruit Feather 32u4  - 32 bit, arduino, moduł,

 

Programming (Arduino IDE)

The module can be programmed using the Arduino IDE. For this, you will need to configure the software in a wayprovided by the manufacturerand connect the board using the microUSB cable.The settings of the Arduino IDE are available on the website of the manufacturer.

Specification

  • Supply voltage: lipol 3.7 V or USB 5 V slot
  • Microcontroller AVR Atmega32u4 3.3 V:
    • Flash memory: 32 kB (2.75 kB of which is occupied by the bootloader)
    • SRAM: 2 KB
    • Clock frequency: internal oscillator 8 MHz
  • Installed Arduino bootloader
  • Works with a modified version of theArduino IDE
  • Slot for microSD card for recording and reading data
  • Connector formicroUSBfor programming, in our assortment, you will find the necessary wire
  • Installed voltage regulator 3.3 V with current delivery up to 500 mA
  • Power supply from USB port or with a lipol battery 3.7 V
  • 20 GPIO pins
  • 8 PWM pins 
  • 10 analog inputs (one for the battery voltage measurement)
  • Built-in lipol charging module 100 mA with LED indicator, which informs about the status
  • LED for pin 13
  • The reset button
  • Dimensions: 51 x 23 x 8 mm
  • Weight: approx. 5 g

 

Voltage to 5.0 V
Voltage from 5.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller Atmega32U4
UC - Core 8-bit AVR
UC - Flash 32 kB
UC - RAM 2 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 10
UC - freq 8 MHz
UC - A/C 10-bit
UC - PWM 8
UC - USB microUSB
UC - microSD yes
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 7 cm
Package height 0.8 cm
Package depth 5 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: