Pro Trinket - Microcontroler module - 3,3V 12MHz - Adafruit 2010

Index: ADA-02782 EAN: 5904422303754

ATmega328 AVR microcontroller module equipped with 28 kb flash memory, 18 digital pins, analog inputs and 8 PWM channels. On the board there is a microUSB connector, thanks to which the chip can be programmed through Arduino IDE environment. This version works with voltage of 3,3 V.

Pro Trinket - Microcontroler module - 3,3V 12MHz - Adafruit 2010
€14.90
€12.11 tax excl.
Delivery 2 pcs scheduled for 2024-04-03
Waiting for delivery
PayPal payment
Manufacturer: Adafruit

Description: Adafruit Pro Trinket - Microcontroller - 3.3V 12MHz.

ATmega328 AVRmicrocontroller module equipped with 28 kb flash memory, 18 digital pins, analog inputs and 8 PWM channels. On the board there is a microUSB connector, thanks to which the chip can be programmed through Arduino IDE environment. This version works with voltage of 3,3 V. In our offer there is also a moduleworking with voltage of 5 V.

Presentation of the possibilities ofAdafruit Trinketboard.

Check how to program Adafruit Trinket via Arduino IDE!

Cooperation with Arduino

The device can be programmed through the Arduino environment, however, due to the small size of the board there are some differences:

  • Pins 2 and 7 are not available due to their use for USB communication.
  • The board operates at 3.3V and 12 MHz, so not all sample programs will work properly.
  • The built-in 3.3 V controller has a current capacity of up to 150 mA.
  • There is no FTDI circuit on the board, an external cable or converter must be used to connect the serial interface. The USB connector is only for program upload.
  • Bootloader takes up 4 kB of flash memory, so the user has 28.672 b at his disposal.

Adafruit Pro Trinket - Mikrokontroler

Adafruit Pro Trinket specifications

  • AVR ATmega328 microcontroller:
    • Flash memory: 32 kb (of which 4 kB occupied by the bootloader)
    • SRAM: 2 b
    • Clock: 12 MHz
    • The tension of work: 3,3 V
  • USB bootloader with programming capability via Arduino IDE environment
  • MicroUSB connector for programming, in our offer you will finda suitable cable
  • Installed 3.3 V controller with current capacity up to 150 mA, enables connection of supply voltage up to 16 V.
  • It can be powered from a USB port or from an external source with an automatic switching circuit.
  • There are two LEDs on the board: green - power supply and red for the user, connected to pin 13.
  • RESET button
  • Digital outputs: 18
  • Analogue inputs: 8 (of which additional A6 and A7 are in the middle of the board)
  • PWM channels: 8
  • Four 2.1 mm diameter mounting holes
  • Dimensions: 38 x 18 x 4 mm
  • Weight: 2,6 g

Voltage to 3.3 V
Voltage from 3.3 V
Voltage nominal 3.3 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - core 1. Single Core
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 7.5 cm
Package height 11 cm
Package depth 0.1 cm
Package weight 0.006 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: