Ready module that allows you to control the belts and chains LED RGB + W via wi-fi network using the app on your smartphone from anywhere in the world. Is supplied with the voltage from 12 V to 24 V, it has 4 channels. In order to use BleBox, it is sufficient to configure the device via web browser. Compact dimensions enable to close the module in the junction box.
Ready module that allows you to control the belts and chains LED RGB + W via wi-fi network using the app on your smartphone from anywhere in the world. Is supplied with the voltage from 12 V to 24 V, it has 4 channels. In order to use BleBox, it is sufficient to configure the device via web browser. The device has threaded connection for mounting the wires, compact dimensions enable to close the module in the junction box.
The device has screw connections for installation of the wires, in the back are adhesive bars which facilitate the mounting of the module.
Before connecting, switch off the voltage in a powered circuit. A driver must be installed in a place protected from the external conditions, protected from access by third parties.
The module has seven leads-in in the form of screw connections to which you can connect the wires with a screwdriver. The device can be controlled by one bar LED RGB W or four LED monochrome bars. Sample configurations are shown below.
+ supply voltage, combined with the LED bar.
- the mass of the system.
R - the red color channel (RED).
G - green channel (GREEN).
B - the blue color channel (BLUE).
In - white channel (WHITE).
You need to connect to a wireless network device called "gateBox-xxxxxxxx" where "xxxxxxxx" is the serial number of the device, then use the store Android Play or the AppStore you need to download the application wBox - control everything. After the application starts, at the top of the screen will display your device, next to the name will be the " + " sign. To prestage devices, you must click the default name of the device.
Configuration can be done via the website - for this you need to connect to a wireless network of device, then just launch the Internet browser and enter the IP address of the device: http://192.168.4.1. A configuration page will appear where you must select your home wi-fi network and enter the password.
Supply voltage: 12 to 24V
Number of channels: 4
Maximum current: up to 12 A (up to 3 a per each channel)
Range: up to 50 m in open space
Operating temperature: 0 to 40 °C
direct link (as Access Point)
wi-fi connection through a standard router
connection with access from anywhere via the Internet
Control signal: 8-bit PWM
Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
The body is made from a polyurethane composition containing no halogen - self-extinguishing for the thermal protection class B (130 °C)