Categories

Arduino MKR WAN 1300 LoRaWAN ABX00017 module - SAMD21 - with headers*

The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and connectivity LoRa. The ideal solution for projects requiring wireless connection or IoT.

More details

ARD-13292

813747020558

Dodano produkt do koszyka

In stock, shipping 24 hours!

Cena: 179,00 zł

Reduced price!

-10,00 zł

189,00 zł

Description

The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and the connection of LoRa due to the additional system Murat CMWX1ZZABZ. The ideal solution for projects requiring wireless network connection or IoT. The device can be supplied with power of 5V via USB or pin VIN and two batteries AA/AAA. Switching power sources is automatic without the need of disruption of the operation. The module is fully compatible with the environment of the Arduino , the only difference is that all pins I/O only work on 3.3 V voltage, the higher voltage may damage the tile. To get wireless connection, you need a GSM antenna connected to the micro uFL slot, which must be purchased separately.

The subject of the sale is the original product for Arduino, Botland is the official distributor of this company.

Key features

Below are a few features that distinguish WAN MD 1300 from the other programmable tiles.

 

FeatureDescription

Installed

bootloader

Thanks to bootloader, only the appropriate microusb cable and the software from the manufacturer's website are necessary to program the device.

Small

size

This version is characterized by small size: 67,64 x 25 mm. Has soldered male connectors on the bottom and female connectors on the top side of the device.

Digital I/O

8 digital inputs/outputs allow, in particular, to control the LEDs, relays and reading the buttons' States.

Efficiency of

current

The maximum current efficiency for one output is 7 mA.

Output

PWM

12 outputs PWM allows, for example, to control the motors and brightness the LEDs.

Analog input

7 inputs, built-in analog-digital converter with a resolution of 12-bits support, in particular, sensors with analog output.

Serial communication

The device supports popular communication interfaces, including UART, I2C and SPI.

Built-in memory

Atmel SAMD21 system is clocked with a clock signal at a frequency of 48 MHz, has 256 KB Flash and 32 KB RAM SRAM.

Supply 5 V

microUSB / battery 3.7 V

To power the Arduino, you can use a power source with a voltage of 5 V with a microUSB connector, pin VIN with voltage ranging from 5 to 6 V or 2 batteries AA/AAA

LoRa

Radio connection, featuring low power consumption and relatively large distance, ideal for IoT devices

Playing music files

The module supports playing music files using the SPI interface (SPI1).

 

First run

To help you get started with the module, we have prepared a tutorial that will help you with the installation and first run of the Arduino environment.

Specyfilacja

  • CPU: Atmel SAMD21 ARM Cortex-M0+ 32-bit
  • Clock frequency: 32.768 kHz (RTC), 48MHz
  • Supply voltage (USB/VIN) is 5 V
  • Battery power: 2x AA or 2 AAA
  • The operating voltage of the pins I/O: 3.3 V
  • Digital pins I/O: 8
  • Pins PWM: 12
  • Supported interfaces: UART, SPI, I2C
  • Analog input pins: 7 (ADC 8/10/12-bit)
  • Analog output pins: 1 (10 bits DAC)
  • Pins supportting external interruptions: 8
  • Maximum pins current I/O: 7
  • Flash memory: 256 KB
  • SRAM: 32 KB
  • Built-in LEDs: 6
  • Connectors: microUSB, micro uFL, ARK 2x
  • The maximum power of the antenna: 2dB
  • Operating frequency: 433/868/915 MHz
  • Size: 67,64 x 25 mm
  • Weight: 32 g

If you install software downloaded from other source than described on the reverse side of the module, the user will receive a message about an unauthorized provider of tile. You can cancel it with one click, and the environment will be working correctly.

 

We guarantee that all tiles marked with a symbol Arduino are genuine and come from the same source. As you can see by checking the list of authorized distributors.

 

  • Voltage to 5.0 V
  • Voltage from 6.0 V
  • Voltage output from 5.0 V
  • Output voltage to 5.0 V
  • Nominal output voltage 5.0 V
  • UC - Microkontroler SAMD21
  • UC - Core 32-bit ARM Cortex M0
  • UC - Flash: 256 kB
  • UC - RAM 32 kB
  • UC - core 1. Single Core
  • UC - Digital pins: 8
  • UC - analog in 7
  • UC - freq: 48 MHz
  • UC - A/C: 12-bit
  • UC - C/A 1
  • UC - PWM: 12
  • UC - USB: microUSB
  • UC - I2C yes
  • UC - UART yes
  • UC - Connector: 5V microUSB
  • UC - SPI interface yes

SAME DAY SHIPPING

Posting the payment for the order on our account on a business day up to 13:00 means sending the goods on the same day!

 

The time of payment depends on the hours of ELIXIR session of the sender's bank and the recipient of the transfer (more information on this subject, for example on the websitehttp://www.kiedy-przelew.pl/).

 

The table presents available forms of delivery in Poland

 

Carrier and
regulations

Bank wire
transfer

Payment
by cash

Delivery
time

Poczta Polska

terms of service

9,90 PLN17,90 PLN1-3 days

Kurier GLS

terms of service

14,90 PLN22,90 PLN

1-2 days

Paczkomaty 24/7 

terms of service

12,90 PLN-1-3 days

If the amount to pay for products exceeds 500 PLN
Delivery is for free!

 

  • Free delivery of orders over 500 PLN does not apply to parcels addressed outside of Poland.
  • Free delivery does not apply when changing orders.
  • The delivery period is counted in working days from the date of dispatch of the order.

 

Comparison of Arduino

 

Model

Micro

kontroler

Pins

Flash

RAM

EEPROM

Power

Interfaces

Popular
clones

Uno

ATmega

328

16 MHz

14 I/O

6 PWM

6 analog

32 kB

2 kB

1 kB

DC: 7-12V

USB: 5V

UART

I2C

SPI

Genuino Uno

DFRduino

Bluno Ble

RedBoard

Metro328

UnoPlus

Uno - WiFi

ATmega

328

16 MHz

ESP8266

14 I/O

6 PWM

6 analog

32 kB

2 kB

1 kB

DC: 7-12V

USB: 5V

UART

I2C

SPI

WiFi

 

Leonardo

ATmega

32u4

16 MHz

20 I/O

7 PWM

12 analog

32 kB

2,5 kB

1 kB

DC: 7-12V

USB: 5V

UART

I2C

SPI

USB

DFrobot

Leonardo

Ethernet

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB
DC: 7-12V
USB: 5V

UART
I2C
SPI
USB

Ethernet

 

Leonardo

Ethernet+PoE

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB

DC: 7-12V
USB: 5V

PoE: 36-57V

UART
I2C
SPI
USB

Ethernet

 

M0

ARM Cortex

ATSAMD

21G18

Cortex M0

48 MHz

14 I/O

12 PWM

6 analog

256 kB

32 kB

16 kB

DC: 5V
USB: 5V

UART

I2C

SPI

DAC

 

M0 Pro

ARM Cortex

ATSAMD

21G18

Cortex M0

48 MHz

14 I/O

12 PWM

6 analog

256 kB

32 kB

16 kB

DC: 5V
USB: 5V

UART

I2C

SPI

DAC

Debug

Genuino Zero

 Genuino101

Intel Curie

Intel Curie

Quark

ARC x86

14 I/O

4 PWM

6 analog

196 kB

24 kB

-

DC: 7-12V
USB: 5V

UART

I2C

SPI

 

Tian - WiFi

SAMD21G18

32-bit

Cortex-M0+

20 I/O
12 PWM

6 analog

256 kB
32 kB
DC: 5V
USB: 5V

UART

I2C

SPI

WiFi

Ethernet

Bluetooth

 

Yun - WiFi

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB
DC: 5V
USB: 5V

UART

I2C

SPI

WiFi

Ethernet

 

Yún - WiFi

PoE

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB

DC: 5V
USB: 5V

PoE: 36-57V

UART

I2C

SPI

WiFi
 

Yún - WiFi

Mini

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB

DC: 5V
USB: 5V

UART

I2C

SPI

WiFi
 
Mega 2560

ATmega

2560

16 MHz

54 I/O
15 PWM

16 analog

256 kB
8 kB
4 kB

DC: 7-12V
USB: 5V

UART

I2C

SPI

Genuino Mega

DFrobot Mega

Bluno Mega

Mega ADK

ATmega

2560

16 MHz

54 I/O
15 PWM

16 analog

256 kB
8 kB
4 kB
DC: 7-12V
USB: 5V
UART

I2C

SPI

 

Due

ARM Cortex

AT91SAM

3X8E

84 MHz

54 I/O
12 PWM

12 analog

512 kB

96 kB

-

DC: 7-12V
USB: 5V
UART

I2C

SPI

USB

CAN
DMA

 

Micro

ATmega

32u4

16 MHz

20 I/O
7 PWM

12 analog

32 kB
2,5 kB
1 kB
DC: 7-12V
USB: 5V
UART

I2C

SPI

Dreamer

Pro Micro 5V

Pro Micro 3,3V

A-Star 32u4

Pro 328

5V/16MHz

ATmega

328

16 MHz

14 I/O

6 PWM

6 analog

32 kB
2 kB
1 kB
DC: 7-12V
USB: 5V
UART

I2C

SPI

 

Pro 328

3,3V/8MHz

ATmega

328

8 MHz

14 I/O

6 PWM

6 analog

32 kB
2 kB
1 kB
DC: 3,4-12V
USB: 5V
UART

I2C

SPI

 

Pro Mini 328

5V/16MHz

ATmega

328

16 MHz

14 I/O

6 PWM

6 analog

32 kB
2 kB
1 kB
DC: 7-12V
USB: 5V
UART

I2C

SPI

Metro Mini

Bluno Nano

DFrduino Nano

Pro Mini 328

3,3V/8MHz

ATmega

328

8 MHz

14 I/O

6 PWM

6 analog

32 kB
2 kB
1 kB
DC: 3,4-12V
USB: 5V
UART

I2C

SPI