Product Description: Sensor for dust / air pollution, formaldehyde, temperature, humidity PM2.5 - PMS5003
Multifunctional sensor that not only checks air quality but also measures temperature and humidity. Combines electrochemical probe for formaldehyde and sensor for temperature and humidity.
Working principle
Such a sensor uses the principle of laser scattering of airborne particles, then collecting the scattered light to a large extent and finally obtaining the scattered light curve. Uniform particle diameter and number of particles with different volume diameter are calculated by microprocessor based on MIE theory. Below is a schematic of the sensor operation.
Sensor terminals
Sensor is compatible with Arduino module, it has UART serial communication pins
No. |
PIN |
Description |
---|---|---|
PIN1 |
VCC | Supply voltage 5 V |
PIN2 |
GND | Chip ground |
PIN3 |
SET | High level is normal operating status, low level is sleep mode - operates at 3.3 V |
PIN4 |
RXD | Serial port connector - operates with 3.3V |
PIN5 |
TXD | Serial port connector - operates with 3.3V |
PIN6 |
Reset | Signal reset - operates witha voltage of 3.3V |
PIN7 |
NC | Leave unconnected |
PIN8 |
NC | Leave disconnected |
Technical specification of the sensor
- Supply voltage: 5 V
- Current: 100 mA
- Current at rest: ≤ 200 uA
- Interface level: L < 0.8 V / 3.3 V, H > 2.7 V / 3.3 V
- Particle measurement range:
- 0.3 to 1.0 μm
- 1,0 to 2,5 μm
- 2.5 to 10 μm
- Particle counting accuracy: 50% / 0.3 μm, 98% / 0.5 μm
- Particle range: PM2.5 standard 0 to 500 μg/m
- Maximum range: PM2.5 standard 0 to 2000 μg/m³
- Particle measurement accuracy: up to 1 ug / m³
- Maximum particle consistency error: ±10 % - from 100 to 500 μg/m³, ±10 μg/m³ - from 0 to 100 μg/m³
- Standard particle size: 0.1 L
- Formaldehyde range: 0 to 1 mg / m³
- Maximum Formaldehyde range: 0 to 2 mg / m³
- Accuracy of Formaldehyde measurement: up to 0.001
- Maximum formaldehyde consistency error: < ± 5%
- Maximum temperature range: 0 to 99 ℃
- Temperature accuracy: up to 0.1 ℃
- Maximum temperature measurement error: ± 0.5 ℃
- Maximum humidity measurement range: from 0 to 99 %
- Accuracy of humidity measurement: 0,1 %
- Maximum humidity measurement error: ± 2 %
- Weight: 50 g
- Default Baud rate: 9600 bps
- Total response time: ≤ 10 s
- Working temperature: from -10 to 60 ℃
- Working humidity: 0 to 99
- Dimensions: 50 x 38 x 21 mm
PMS5003ST - Multifunction sensor
PMS5003ST is a multifunction sensor that is designed to detect not only particle and formaldehyde concentration, but also to measure temperature and humidity values. As a particulate concentration sensor, it can be used to measure the number of airborne particles using a laser. What distinguishes the PMS5003ST sensor from other popular designs is also an electrochemical probe for measuring formaldehyde concentration and a single chip temperature and humidity sensor.
Applications of PMS5003ST sensor
The sensor can be placed in a variety of measurement instruments designed to study environmental parameters in the air, as well as other instruments to evaluate environmental pollution parameters, to provide the necessary measurement data in real time. The advantage of the PMS5003ST multifunction sensor is its ability to detect particulate matter from 0.3µm in diameter upwards. The offered PMS5003 sensor is ideal for measuring dust/air pollution, formaldehyde, temperature, humidity PM2.5.
Useful links |