LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809

Index: ADA-05295 EAN: 5904422354312

Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.

LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
€6.90
€5.61 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino

Specification

  • Supply voltage: 3 V to 5 V
  • Voltage of the pins: 3 V to 5 V
  • Three axes: X, Y, Z
  • Communication interface: I2C (TWI), SPI
  • The bus address: 0x18 or 0x19 (selected with SDO pin)
  • Resolution: 10 bits
  • 3 additional analog inputs for reading I2C
  • Measuring ranges (configurable):
    • ±2 g, ±4 g, ±8 g, ±16 g
  • Pins: goldpin connectors - 2.54 mm pitch (strap included in the kit for self-soldering)
  • 4 mounting holes with diameter: 2 mm
  • Board sizes: 25,4 x 17,8 mm
  • Weight: 1.5 g

 

 

 

Description

Sensor for measuring acceleration in three axes: X, Y, Z in the range of ±2 g, ±4 g, ±8 g / ±16 g. For communication with the central unit is the popular I2C or SPI bus. The module has necessary for the correct operation of the system, passive elements. Pins are holes for self-soldering of the goldpin connectors - 2.54 mm pitch (included) to connect the sensor viawires or to directly attach into the breadboard. The module also has a STEMMA QT connector that can be used to connect the sensor to the controller without soldering.

    

The product is compatible with Arduino

A detailed description along with sample code, can be found inthe user guide.

 

Pins

The sensor has pins for mounting the connectors of goldpin type - pitch of 2.54 mm, the strap is in the set for self-assembly. The board also has a STEMMA QT connector, which is an alternative connection method.

 

LIS3DH 3-osiowy akcelerometr cyfrowy I2C / SPI

 

Pin

Description

Vin The module's supply voltage ranging from 3 V to 5 V.
GND The ground of the system.
3Vo Regulator's output of 3.3 V with the current of 100 mA.
SCL Clock line of the bus I2C (TWI) SPI
SDA The data line of the I2C bus (TWI) / CFI (MOSI)
SDO

The address selection of the I2C bus:

  • 0x18 - default address, the pin is pulled to ground through the resistor of 10,
  • 0x19 - alternate address - in order to select it, you must indicate the high status.
In SPI mode this pin is MISO.
CS

Selection of I2C / SPI. Pin not connected or connected to a high status, selects the I2C communication, connected to low status, it selects the SPI communication.

INT

Programmable interrupts, the details inthe documentation.

A1, A2, A3

Analog pins to read the I2C bus, the details inthe documentation.

 

Package width 7 cm
Package height 0.5 cm
Package depth 4 cm
Package weight 0.004 kg

Be the first to ask a question about this product!

Product reviews

LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809

5/5

Average grade

3

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Emil 24.06.2023 Confirmed purchase Translated review
The sensor is operating as specified. Convenient soldering pads for connecting wires or goldpins. I haven't used the Stemma QT connector, so I can't comment here.
Zbigniew Ś. 01.08.2021 Confirmed purchase Translated review
basic product in a given category, cheap, for individual applications, good quality
Iurii 05.02.2024 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: