Lining equipped with keyboards and displays have many practical uses in different applications, but it may seem that they are only available for Arduino. However, the designers of the modules for embedded systems thought about a similar solution also for Raspberry Pi, located under the name Raspberry Pi Hat. The assortment of our store, you will find a wide choice of nozzles with przyciskowymi interfaces and LED displays, OLED or E-paper dedicated to the Raspberry Pi. Simple installation, as well as specialized software libraries let you quickly launch pads.
The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The device provides easy reading of i.a.: orientation in space, temperature and humidity, works with Raspberry Pi 3B+/3/2/B+/A+.
Screen, type e-paper with a diagonal of 2.7" in E-Ink technology with a resolution of 264 x 176 px. It works with voltage from 3.3 V, communiactes via interface SPI. The board has soldered goldpin connectors.
Shield for Raspberry Pi with TFT LCD display of 1.44" and a resolution of 128 x 128 px. Screen based on ST7735S driver, it communicates through the SPI bus. Additionally, on the board is a joystick and three buttons.
Pi-top is a modular laptop, its main element is the Raspberry Pi 3. It features the screen 14 " with a resolution of 1920 x 1080 pixels, a keyboard, a touchpad, and a full case. It can work up to 8 hours on an attached battery. The set does not contain minicomputer Raspberry Pi, you should buy it separately.
Shield with six matrixes LTP-305 5 x 7 LED in green color, based on the system IS31FL3730. Perfect to create a scroll screen in retro style, a small, 30-band spectrum analyzer or a clock in a retro style. Set contains elements for self-assembly.
Shield with six matrixes LTP-305 5 x 7 LED in red color, based on the system IS31FL3730. Perfect to create a scroll screen in retro style, a small, 30-band spectrum analyzer or a clock in a retro style. Set contains elements for self-assembly.
Screen, type e-paper with a diagonal of 4.2" in the E-Ink technology with a resolution of 400 x 300 px. It displays the image in three colors: black, white and red. It works with voltage of 3.3 V, communicates via interface I2C and SPI. The kit includes an additional connector goldpin and spacers.
The module for self-assembly allowing the expansion of Raspberry Pi with additional analog connector VGA video. This allows for the connecting of two monitors simultaneously to HDMI and VGA. The module is compatible with the Raspberry Pi 3 / 2 / B+.
The e-paper display with a diagonal of 7,5" in E-Ink technology with a resolution of 640 x 384 px. Works with a voltage of 3.3 V. It is designed for use with the main module. Communicates via the SPI interface. Display supports 3 colors: black, white and red. The set has HAT cap for Raspberry Pi.
The e-paper display with a diagonal of 7,5" in E-Ink technology with a resolution of 800 x 480 px. Works with a voltage of 3.3 V or 5 V. It is designed for use with the main module. It communicates via the SPI interface. The set has HAT cap for Raspberry Pi.
Shield for Raspberry Pi with display 2.15 " with a resolution of 128 x 64 px. It is based on the system SN3218. It has 6 zonal RGB backlight and 6 touch buttons. It communicates using the I2C interface. The module is connected directly to the GPIO of the Raspberry.
Shield for Raspberry Pi with a flexible display e-paper of 2.13 " with a resolution of 212 x 104 pixels. It is connected directly to GPIO pins. It communicates via SPI interface. It supports partial updates. Compared to standard displays of e-Paper, this flexible display is resistant to damage, is lighter and thinner.
Shield for Raspberry Pi with white OLED display with a diagonal of 1.3 " and a resolution of 128 x 64 px and a joystick and two buttons. Screen is based on controller SSD1306, communicates via I2C. It has soldered the connector to the GPIO pins of the Raspberry.
Accessory for the Raspberry Pi version of 3B+, 3B, 2B, B+, A+, Zero, and Zero W with 18 LEDs controlled individually. The module communicates via I2C interface, it is suitable for most cases of minicomputer, and in network are numerous examples of its service.
The e-paper display with a diagonal of 5,83" in E-Ink technology with a resolution of 600 x 448 px. Works with a voltage from 3.3 V to 5 V. It is designed for use with the main module. Communicates via the SPI interface. Display supports 3 colors: black, white and yellow. The set has HAT shield for Raspberry Pi.
Displays like E-paper, offers simple maintenance and low energy consumption, and more - can view the last saved contents into infinity, even after turning off the power source. In its principle use particles, charged positive and negative electric charge. In the database display E-paper, is a matrix in the form of a layer of liquid film, which is suspended mikrokapsułki charged negatively or positively, what is visually presented, respectively, black and white. For ease of use and low energochłonnością, display E-paper for Raspberry Pi, says compactness, an interesting effect of displaying graphics and excellent readability, even in strong sunlight.
We offer our shop trim Sense Hat, located in a small area several useful features - includes joystick with push button, matrix LED 8x8, sensors for measuring pressure, humidity and ambient temperature, and also features a 3-axis MEMS gyro along with accelerometer and magnetometrem that allow you to quickly determine the coordinates in space for the object with a Raspberry Pi on Board. Connect the nozzle to the GPIO pins on a Raspberry Pi and discover its huge potential. Trim Sense Hat supports all of the projects on the Raspberry Pi, and allows, in particular, the measurement of the speed of the robot with Malinka on Board and determine its location based on coordinates. Built-in LED matrix, you can view the measurement data from the sensors, the visualization of a compass, but also in the entertainment purposes of the game Tetris using the control with the onboard joystick. The pad is easily programmed thanks to a special library of Python. Using the pads Sense Hat you can start at the European Astro Pi competition for students organized by the Union of Space Agencies together with the Raspberry Pi Foundation. The contest is to write programs on the Raspberry Pi, from which astronauts will use during the session for scientific research on the International Space Station. Connect the Sense Hat for Raspberry Pi and go!