Confidence in the operation of security locks and doors is certainly an important element of home security, but if it is standing out of the way or the entrance to it is not visible from the street, a burglar can easily bypass these security features and break into the house. Besides, he does not have to bother with a lock and a solid door - it is easier to enter through the window. The way to hinder its operation is to equip the house with an alarm system. The mere information that the house is protected by an alarm (a warning board or a visible element of the alarm system) is often enough to discourage potential burglars. Alarm systems are not only protection against damage and theft of property. These are also warning systems, which also trigger an alarm in the event of a decrease in air quality, detection of gas leaks (carbon monoxide) or fire. In our store, we offer alarm sensors of various types, thanks to which you can expand the existing or build a new alarm system.
Top class sensor that detects smoke in the air, it is powered with the built-in lithium battery. It is equipped with technology Thermoptek. It can be connected to Wi-Safe 2, Z-Wave or Zigbee. Sensors can be connected to the network.
Photo-optical sensor for the detection of smoke. It is used to inform about dangerous situations. Signaling is performed using the signal and optical sound. It is designed for mounting on the ceiling. It is powered with the voltage of 9 V DC (3 x CR2450). It has the test button to check proper operation. It does not require a cable connection.
Photo-optical sensor for detecting the smoke. It is used to inform about dangerous situations. Signaling is performed using the optical and sound signal. It is designed for mounting on the ceiling. It is powered with the voltage of 9 V DC (1 x 6LR61 9V). It has test button to check proper operation. It does not require a cable connection.
Photo-optical sensor for the detection of smoke. It is used to inform about occurrence of danger in closed spaces. Signaling is performed using the acoustic and optical signal. It is designed for mounting on the ceiling. Powered with the voltage of 3 V DC (lithium battery). It has test button to check the correctness of operation....
Sensor recognizing the concentration of carbon monoxide (CO) in the air. It uses a voltage of 3V (2 x AAA batteries). It alerts you with sound and optical signals about dangerous for human's health concentration of this gas.
4 liter bottle with test gas in the form of a compressed carbon monoxide with a concentration of 300 ppm. It allows for the control of the operation of the sensors of carbon monoxide. One package is enough for holding up to 40 tests.
High-class heat sensor, powered by integrated lithium battery. It is equipped with technology Thermistek. It can be connected to Wi-Safe 2, Z-Wave or Zigbee. Sensors can be connected into the network.
A sensor that detects smoke in the air. Powered by two replaceable AA batteries (included). Thanks to an aesthetically pleasing design and simple installation, it is ideal for houses, as in all other areas where it is recommended to protect from fire sources.
Communication module Wi-Safe 2 for alarm sensors FireAngel. The device adds the possibility of connection for sensors ST-630, HM-WHAT-10X and HT-630. It has a built-in lithium battery that requires no charging or replacement throughout the whole battery life of up to 10 years.
Relay FireAngel WRLYB-1EU allows you to extend the Wi-Safe 2, with the ability to connect additional devices, for example, the alarm panel, messaging devices, etc. Powered with the voltage of 230 V with 12 V of the emergency power supply in the form of 4 AAA batteries.
Relay FireAngel WRLYM-1EU allows you to extend the Wi-Safe 2, with the ability to connect additional devices, for example, the alarm panel, messaging devices, etc. Powered with the voltage of 230 V with 12 V of the emergency power supply in the form of a lithium battery durable for 10 years.
A sensor that determines volatolized explosive gases such as methane, ethane or propane. It is supplied with the voltage of 230 V. It is used to warn about the threats of the gas leak using the audio signal. It is characterized by high work efficiency.
A sensor that detects smoke in the air. Powered by a built-in lithium battery that does not require charging or replacement during the whole period of operation. Thanks to an aesthetically pleasing design and simple installation, it is ideal for houses, as in all other areas where it is recommended to protect from fire sources.
A sensor detecting high concentration of natural gas (methane) and cylinder gas (propane-butane) in the air. It is supplied with mains voltage of 230 V. It is used for prevention from natural gas leaks, alarming threat with an audio signal.
A sensor that recognizes the concentration of carbon monoxide (CO) in the air, and also has a built-in thermometer. Powered by three AA batteries. Used for warning with audio signal about harmful CO leaks.
CO (carbon monoxide) sensor powered by two AA batteries (included) with sensitivity level of 50 ppm. Due to its high resistance to shocks and moisture, it can be used both in private households and in caravans, yachts, etc.
Sensor of carbon monoxide powered by an internal lithium battery that does not require charging or replacement throughout the usage of up to 10 years. Due to resistance to shocks and moisture, it can be used both in private households and in trailers, yachts, etc.
A set of three high quality certified smoke detectors FireAngel ST-630 with modules Wi-Safe 2, which, thanks to technology Thermoptek connect the sensor optical and heat even more flexible and responsive to emerging threats. The sensors are connected via a wireless network via Wi-Safe 2.
High-end sensor carbon monoxide, powered by built-in lithium battery ensures operation in automatic mode for about 10 years. The sensor has a module for integrating with the system " smart house ZigBee. In case of detection of the sensor NM Chad-WHAT-10X activates a loud alarm sound and visual.
Carbon monoxide sensors are designed to monitor closed rooms for the presence of carbon monoxide (CO) in the air. For sensors with display, the LCD will display the CO concentration value in PPM (one particle of CO per million air particles). The sensitivity of the alarms is selected so that they react at concentrations of CO that are not life-threatening and enable appropriate action to be taken long before the concentration of carbon monoxide reaches a level that is hazardous to health. If an increased concentration of carbon monoxide is detected, an alarm is automatically triggered in the form of an optical and acoustic signal, which informs people inside the building about a possible threat. The CO sensors are highly selective for carbon monoxide, ie they do not detect any other gases. They cannot be used as smoke detectors. Although the smoke also contains carbon monoxide particles, the CO alarm activation time can be long enough that the fire spreads in an unmanageable manner. CO sensors, like any other devices with an electrochemical sensor, have a limited operating time, usually about 10 years from the moment of installing the power battery. Then, the signalling about the end of the service life will be activated. In this case, the sensor should be replaced immediately, as it cannot detect carbon monoxide.
First of all, it should be noted that it is a brand-name product manufactured following the standards in force in Poland for home carbon monoxide detectors. Compliance with the standard must be confirmed by an independent, notified testing body. The mere declaration issued by the manufacturer or importer is not sufficient! The sensor must have a built-in sound and light signalling of exceeding the permissible CO threshold. In the case of sensors with an LCD, the current level of carbon monoxide concentration should be displayed on an ongoing basis. When there is no carbon monoxide in the room, the number 0 should be constantly displayed on the LCD panel. This is additional information for the user that the batteries powering the detector are not discharged.
The offer of the Botland store also includes sensors in the form of electronic modules for self-assembly. Our assortment includes carbon monoxide sensors, real-time air quality sensors, vibration sensors, light sensors and many other sensor modules. The sensors we offer for DIY projects are compatible with Arduino and Raspberry Pi boards, and their design supports communication via UART and I2C protocols, as well as the ability to control via PWM signal. We also recommend our offer that contains a wide range of sensors that allow you to measure other environmental conditions, such as temperature and air humidity.