Motors - Strona 3
Turbo Metal Gear Worm Motor (12V 40RPM 8kg.cm)
The motor uses a metal worm gear to achieve high strength and high torque of 8 kg*cm (0.78 Nm). It is powered by 12V and has a speed of 40 rpm.Mini Vibration Motor MT63 1,5 V
Small metal vibrating motor powered by 1.5 V. Idle current 180 mA. Dimensions: 17 x 10 x 12 mm.Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 25cm stroke
Electric actuator powered with 12 V voltage. Device has a load capacity of 2000 N (200 kg), works with a speed of 7.5 mm/sec. Maximum current supply is 4.2 A. Pulse generator...Micro motor N20-BT44 250:1 90RPM - 6V
The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.Mini vibration motor 10x2mm - 3V
Miniature vibrating motor . It is powered by a voltage of 3 V. The dimensions of the module are equal: diameter 10 mm, height 2 mm . Current consumption is 80 mA . The...Micro motor N20-BT39 1000:1 32RPM - 9V
The N20 series miniature motor with 1000:1 gearing, has 32 RPM, torque is 9 kg*cm (0.883 Nm). The supply voltage is from 3V to 9V.DC Motor Dagu DG01D with 48:1 Gear 4,5V with double sided shaft - 2pcs.
Plastic motor with 48:1 gearbox. Dual shaft turns at up to approx. 90 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 volts, it draws an average of 190 mA of current (max...Hobby Motor - mini DC motor M260 1-3V - SparkFun ROB-11696
A small metal DC motor equipped with a gear wheel placed on the shaft. The wheel has a diameter of 6 mm and 10 teeth , drives other parts without much resistance, allows you to...DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with speed control capability. The device is compatible with Arduino . A propeller and cable are also included.Linear Actuator Super Power Jack Mini 1000N 5,4mm/s 12V - 25cm stroke
Electric actuator powered with 12 V voltage. Device has a load capacity of 1000 N (100 kg), works with a speed of 5.4 mm/sec. Maximum current supply is 1.5 A. Pulse generator...Electrical Actuator Super Power Jack 2000N 7,5mm/s 24V - 44cm stroke
Super Power Jack electric actuator from Elektrobim. Powered by 24 V, it has a lifting capacity of 2000 N (200 kg) . It operates at 7.5 mm/sec and has a maximum current...Metal DC Geared Motor - 6V 133RPM 4.5kg.cm
Metal gearing motor providing 4.5 kg*cm (0.44 Nm) of torque. Supply voltage is 6 V and speed is 133 rpm.Micro motor N20-BT39 1000:1 14RPM - 9V
The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 30cm stroke
Electric actuator powered with 12 V voltage. Device has a load capacity of 2000 N (200 kg), works with a speed of 7.5 mm/sec. Maximum current supply is 4.2 A. Pulse generator...DC Motor Dagu DG01D-L with 48:1 Gear 4,5V - double sided shaft - 2pcs.
Plastic motor with 48:1 gearbox. Dual shaft turns at up to approx. 140 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 volts, it draws an average of 190 mA of current (max...Stepper Motor SY35ST28-0504A 200 steps 10V / 0,5A / 0,1Nm - Pololu 1208
Bipolar stepper motor 200 steps (1.8 °) 10 V supply with 500 mA current per coil, holding torque 1 kg*cm (0.1 Nm). Dimensions: 35 x 35 x 28 mm (NEMA 14).37Dx57L Motor with 150:1 Gear 24V 68RPM - Pololu 4687
DC motor with 150:1 gearbox by Polol. Powered by 12 V to 24 V , it draws an average of 100 mA of current and up to 3000 mA when the shaft is stopped. Polol's motor speed is 68...Dagu motor gear 34:1 DC 6V 294RPM
Motor with 34:1 metal gearbox providing 7 kg*cm (0.69 Nm) of torque. The supply voltage is 6 volts and the speed is 294 rpm.Vibration damper for NEMA17 stepper motor
Vibration damper designed for mounting on NEMA17 stepper motors, used, among others, in 3D printers. The use of a vibration damper enables the reduction of noise and...DFRobot DC 12V 160RPM motor with worm gear
Metal worm gear motor for strength and high torque of 2.2 kg*cm (0.21 Nm). Supply voltage is 12V and speed is 160 rpm.Stepper Motor JK57HS76-2804 200 steps/rot 3V / 2,8A / 1,89Nm
JK57HS76-2804 bipolar four-wire stepper motor with 200 steps per revolution (1.8 degrees). It is powered by 3 V, draws 2800 mA per coil. Torque is 19.0 kg*cm (1.89 Nm)....Mini Vibration Motor 10x3mm - 3V
Small vibrating motor with a diameter of 10 mm and a height of 3 mm . Powered by 3 V . Current consumption is 80 mA . The motor has two red and blue wires with the...