Lining, contains the communication modules, GPS, GSM, Bluetooth, wifi, XBee and a lot innnych.
Shield for Arduino MKR, which allows you to connect microSD card. It also has a Flash memory of 2 MB and space for prototyping. It has a built-in Winboard W25Q16 chip. It communicates via the SPI interface. It works with a voltage of 3.3 V.
A device that can replace more than 35 different systems. Shield is connected via Bluetooth 4.0 BLE with a mobile app that allows using via Arduino with functions of all devices running with iOS from version 9.0 or Android 4.3, for example, sensors, display, GSM, wi-fi, GPS, etc.
Shield for Arduino MKR, connection of the microcontroller of the RS-485 bus which supports up to 32 devices on a line with length of up to 1 km with a speed up to 10 Mbps. The module is based on a MAX3157CAI, equipped with goldpin and screw connectors. It communicates through UART interface. It works with voltage from 7 V to 16 V.
Cap for Arduino with SIM808 system which allows you to send text messages, create links in a GSM network, GPRS data transfer and reading of GPS position. Communication via serial interface UART (RX, TX) using AT commands, the kit includes GPS antenna, power adapter and microUSB cable.
Shield for the Arduino that allows you to save data to the SD card. RTC built-in clock allows to save the exact time. The system communicates via I2C, works with plates Uno R3, Duemilanove, Diecimila, Leonardo and Mega 2560 R3 and ADK.
Shield for Arduino MKR enabling the connection to the Ethernet network. It is equipped with a system W5500 and a connector for microSD cards. It communicates via the SPI interface. It works with a voltage of 3.3 V.
Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional module. It works with the Arduino Uno and derivatives
The FireBeetle module compatible with Arduino, equipped with LoRa SX127x 433 MHz module with built-in PA (Power Amplifier), controlling is through SPI interface. It is used for wireless communications with a frequency of 433 MHz. It is designed for IoT projects (Internet of Things). The module is powered with a voltage of 3.3 V.
Shield for Arduino, enabling the reading of data from the NFC devices and RFID at 13.56 MHz. The module has integrated antenna, it is supplied with the voltage from the Arduino pins, it communicates via I2C or SPI bus.
The module supports GSM and GPRS communication. It allows for voice calls, sending SMS messages. On the board are: two connectors for SIM card, powering module for battery LiPol, as well as POWER and RESET buttons. Version works with Arduino and Raspberry Pi, it has a connector for antenna u.FL.
Board that facilitates the use of the LinkIt Smart 7688 Duo module via this module's function out on the 4-pin Grove connectors. In addition, it enables the connection of the Arduino shields and has Ethernet and USB connectors out. Thanks to it, the connection of sensors becomes much easier. The board supports the I2C bus and UART.
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS messages. On the board are: two connectors for SIM card (dual SIM), microSD slot and outputs/inputs of the audio.
Board that facilitates the use of the LinkIt Smart 7688 Duo module via this module's function out on the Ethernet connectors, 3.5 mm Jack, USB and 4-pin Grove connectors. TThanks to it, the connection of sensors becomes much easier. The board supports the I2C bus and 2 x UART.
The module is working with Arduino, which provides connectivity in GSM and GPRS. It allows for voice calls, sending SMS messages. It also has a GPS module. On the Board are: connectors for SIM card, output Jack, battery charger lipol and connectors u.FL for external antenna.
Shield for Arduino, which allows you to send text messages and create connections in the GSM network. It also has GPS and LTE, as well as sensor BME280. It communicates via serial interface UART (RX, TX) using the AT commands.
Shield for Arduino Bluetooth Low Energy. Allows for wireless connection of a microcontroller (e.g. Arduino) with the device equipped with operating system Android (4.3+) or iOS. Communication via SPI.