In this category we offer the elements needed to create smart clothing. There are, among other things, special materials, threads or fasteners, and the modules and drivers. Using these products can build and program projects based on the connection of textiles with electronics. The proposal Botland you will find drivers, and materials for smart clothing from the best manufacturers, such as Sparkfun, Velleman, or Adafruit.
Conductive thread with the medium thickness (0.2 mm), made of stainless steel of 316L. The thread has a resistance of approx. 1.0 Ω per inch, it conducts the current of up to 75 mA. The price includes a spool with a length of 10 meters.
Thin, strong and smooth conductive thread made of stainless steel 316L. The product allows for hand and machine sewing. The thread has a low resistance of about 0.8 Ω per inch, it conducts the current of up to 100 mA. Price includes a spool with a length of 18 meters.
Small, round module with microcontroller AVR Atmega 32u4. Flora is designed to handle smart clothes, on the board is miniUSB connector, thanks to which the system can be programmed via the Arduino IDE.
Module enabling to add a function to detect the color of ambient light for the system of smart clothes Adafruit Flora. Applied sensor is the TCS34725 with a LED backlight and a built-in IR filter. It has a dynamic range of 3 800 000 : 1, it communicates through I2C bus.
Development board is intended for development of interactive electronics circuits embedded in clothing, the so-called "smart clothes". Features 17 GPIO pins, battery charger, li-pol, Hall sensor and temperature sensor. Fully compatible with Arduino.
Module for adding a read of the position and time from the GPS system in the smart clothing system from Adafruit Flora. Applied MTK3339 chip has the RTC system with the ability to attach the holder with the battery sustaining power.
Miniature module with programmed Attiny85 AVR microcontroller, it has an 8-KB of Flash memory, 4 digital pins, analog input and 2 PWM channels. Uploaded program presents lighting effects on the connected LEDs for the digital outputs. The device can be used for the smart clothes system.
Miniature, round module with AVR Attiny85 microcontroller has an 8 KB Flash memory, 3 digital pins, analog input and 2 channels of PWM. On board is miniUSB connector, through which the system can be programmed via the Arduino IDE.
Pimoroni Bearables is a set of sensors and turned on by LEDs in the form buttons for kids with forest theme. The kit includes everything necessary for attaching on the clothing along with conductive thread and needles.
Conductive thread with the medium thickness (0.2 mm), made of stainless steel of 316L. The thread has a resistance of approx. 1.3 Ω per inch, it conducts the current of up to 50 mA. The price includes a spool with a length of 23 meters.
Development board is intended for designing interactive electronic circuits embedded in the so-called "smart clothes". Equipped with li-pol battery charger and 24 fully programmable RGB LED. Fully compatible with Arduino.
EL Tape is a flexible, electroluminescent tape from plastic which includes a layer phosphor and glows with a neon gleam during power supply with the correct voltage. Tape length is 1 m, width is 15 mm. Tape has a cable with the length of 20 cm with JST-PH plug. Tape colour: red.
The connection of tissues with electronics, gives amazing opportunities. On the websites of the manufacturers of materials and accessories to smart clothing, you can find examples of projects such as the GPS jacket, headband, scarf, changing colours or Teddy joystick for games.
Smart clothes, as well as conventional clothing, consist of, respectively wykrojonych and are sewn together pieces of fabric. In addition, there are drivers and other electronic components, due to which wear takes on new functions (such as lights or connected to the Internet). However, traditional textile products, may not operate correctly placed them electronically - this requires special materials to create intelligent clothes. The proposal Botland you will find a wide selection of conductive threads and fabric, rubber, Velcro and latches intended for use in intelligent clothing. This section also provides a special needle that is designed for hand sewing with conductive thread.
In this category are also available drivers and extension modules for smart clothing. Thanks to them you can give for your project, functions based on the use of the compass, LEDs, Bluetooth, UV sensor, accelerometer, compass, color sensor, gyro or magnetometer. We offer microcontrollers already programmed, as well as models designed for self-programming by using Arduino. More detailed information about compatibility with other electronic elements, method of installation and the power available in the description and documentation of each article and on the website of the manufacturer.